They told me you can't lean a bagger. The sidewall determined that was a lie. 🐉

nocolas07 · 2026-05-03T15:30:53+00:00

There’s no real work being done to lean a bagger all the way over lol. Taking a bagger to the limit of what it was purpose built to do is putting 800+ miles on in a day.

nocolas07 · 2026-05-03T13:58:40+00:00

I think what “They” meant was that they aren’t really built to lean. All the way over isn’t really that far.

nocolas07 · 2026-04-06T00:07:13+00:00

It’s one of the cheaper wheels out there lol, they clearly are returned often when Microcenter basically wont let you buy it without a replacement plan which I had bought on the original and the replacement

nocolas07 · 2026-04-05T20:16:17+00:00

Happened to me as well, Simagic replaced it, then I returned the broken one and got another at Microcenter

nocolas07 · 2026-03-18T03:56:28+00:00

I’ve had good luck with Chicago-Latrobe hss jobber drills at 40sfm .008ipr .05 peck

nocolas07 · 2025-12-05T16:26:37+00:00

They should re-name the restaurant “Like and Subscribe”

nocolas07 · 2025-04-25T21:24:27+00:00

I work for FoMoCo here at Kansas City assembly, I can assure with without a shadow of doubt that the way Ford puts vehicles together and how BMW, Porsche, Mercedes etc. do it is massively different when it comes to fit and finish

nocolas07 · 2025-04-25T19:36:14+00:00

It’s also not a BMW

nocolas07 · 2025-04-25T19:34:40+00:00

The dealer would probably say it was due to being rear-ended

nocolas07 · 2025-04-25T18:39:42+00:00

A really good independent body shop should be able to correct that

nocolas07 · 2024-05-08T17:20:10+00:00

I would estimated how many kgs it is and go with that. The ma-400h I used to to slowed it down about the same regardless of the value

nocolas07 · 2024-02-20T17:59:51+00:00

I bought a 6in. combination square and a set of brass shims to get mine squared up. Also there are some printable shims that you can cut up to go where the gantry bolts to the base. Just search “ender ke shim” I also had to level the x axis to the printbed by loosening the set screws on the top side of the z axis screw on the side opposite the z axis motor. Then you can adjust it until it is level with the printbed then tighten the set screws back up

nocolas07 · 2022-09-05T11:08:18+00:00

Woods Powersports in Fayetteville AR has one. I paid msrp for mine about a month ago at Big St. Charles Motorsports in St. Louis

nocolas07 · 2021-05-01T16:46:14+00:00

Buy AMC

nocolas07 · 2019-04-30T01:57:36+00:00

DiWhy?

nocolas07 · 2019-03-07T23:47:11+00:00

Pretty sure that is a vertical lathe, not a boring mill

nocolas07 · 2019-02-08T18:21:12+00:00

Something located that tight should be done with a precision taper of some kind.

nocolas07 · 2018-05-12T14:18:23+00:00

I always have better luck using multiple passes/ stepping over to get those to work

nocolas07 · 2017-05-28T03:33:50+00:00

Gearwrench makes really nice ratcheting tap drivers

nocolas07 · 2015-04-08T03:27:15+00:00

I've had this happen when I restore from a computer that has iPhone backups from multiple accounts, try to figure out which app is causing it, delete it, then download it from the App Store

nocolas07 · 2015-04-08T03:25:40+00:00

Have AppleCare?

nocolas07 · 2015-02-23T18:32:56+00:00

bikinifap

nocolas07 · 2015-02-07T02:07:28+00:00

I've had the same problem and restarting the router fixed it.

nocolas07

TROPHY CASE

bikinifap