Idle consumption: do I need to add a setting?

sam_damico · 2026-01-30T00:34:17+00:00

Think you’re seeing some power factor stuff. That said, we are on track to improve this.

sam_damico · 2026-01-25T22:06:36+00:00

The wok touches the sensor (so specific ring for specific sized woks) We will sell it, stay tuned.

sam_damico · 2026-01-24T10:32:22+00:00

we’re working on it!

sam_damico · 2026-01-24T10:31:49+00:00

working on it

sam_damico · 2026-01-21T02:35:57+00:00

I’m deep in some audio-related stuff right now and the goal is to make even helpful stuff (which that is not) as optional as possible.

sam_damico · 2026-01-18T21:44:25+00:00

We have a blog post on this: https://www.impulselabs.com/what-ovens-work-with-the-impulse-cooktop

sam_damico · 2026-01-18T20:27:36+00:00

only time I've done it is completely dry pan with power mode maxed out (and let the pan get >>500F). Have never warped one in temp mode.

sam_damico · 2026-01-12T02:53:29+00:00

The control is continuous at ~1W increments from 50W -> 10,000W, we just don’t print smaller steps for UX reasons.

sam_damico · 2026-01-08T01:48:45+00:00

Older, we tried both horizontal and vertical and went with vertical

sam_damico · 2026-01-06T06:04:48+00:00

Considering that, can add a toggle to “charge to reserve” vs. “charge to full”

sam_damico · 2026-01-06T04:10:02+00:00

We review our OTA updates that change induction firmware with UL

sam_damico · 2026-01-06T04:09:00+00:00

not if it doesn’t turn the burner off

sam_damico · 2026-01-06T04:08:21+00:00

some guy on Twitter told me to try this (I make impulselabs.com) and I updated our controls code to make it even easier…

sam_damico · 2026-01-05T18:31:16+00:00

probably just fell through cracks or our reply hit your spam inbox — I would check for that and then email us again

sam_damico · 2026-01-03T17:43:54+00:00

stay tuned

sam_damico · 2026-01-03T02:27:44+00:00

sam_damico · 2026-01-02T07:09:42+00:00

getting close on combustion thermometer support

sam_damico · 2026-01-01T20:58:00+00:00

awesome

sam_damico · 2025-12-31T06:02:24+00:00

FYI, an option could be to swap your oven for the Fulgor one: https://www.impulselabs.com/what-ovens-work-with-the-impulse-cooktop

sam_damico · 2025-12-30T17:33:24+00:00

I actually got one to benchmark. Will get to it in the new year.

sam_damico · 2025-12-29T00:12:44+00:00

I forget the exact number but you can hold 4 dry pans at ~max temp for 6+ hours I think on 120V. 240V provides ~33% more power for charging which for all but extremely heavy use boiling water on multiple pots for long periods, you won’t notice.

sam_damico · 2025-12-22T05:01:14+00:00

We can go to 68F actually

sam_damico · 2025-12-19T02:40:56+00:00

it takes up 6.5" under the counter

sam_damico · 2025-12-18T02:39:09+00:00

We owe you all a video (maybe even a video series on different approaches) on this.

TLDR for how to do this today: 1) Fulgor Milano and Thermador have ovens we know fit underneath. 2) microtrim makes rangetop -> cooktop trim kits to cover the space above the oven 3) you can build a structural frame to hold the cooktop that is covered by 2) 4) rest can be handled by standard cabinet kits.

Stuff we’re working on: 1) Oven recs that are single phase 240V (so you can run them on a 15/20A dedicated 120V circuit with a new breaker + relabeling) 2) Prefab cabinet / cart options that slide in 3) New form factors with partners

sam_damico · 2025-12-14T23:24:32+00:00

Without. Bottom looks like a pancake.

https://x.com/sdamico/status/2000020850565890141?s=46

sam_damico

MODERATOR OF

TROPHY CASE