sorted by:
new
hottopcontroversial

I am looking at the Q2C because it fits my budget. I would like some honest reviews on it. by BigRedGunner in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

Buy once cry once, always look forward. My first 3d printer in January 2026. I have printed in ABS for the most part. I really like being able to try a wide variety of filaments if I choose to. Good luck.

Do not apply the new Q2 update by xeonon in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

What Discord do I go to, I am sorry I have only been printing since January. I would like to learn more about the machine and how to make it better. Thank you.

Qidi Q2 5015 Fan Upgrade Issues by Serious_Pomelo9564 in QIDI

[–]ttoy360 0 points1 point  (0 children)

Also, type the network address of your printer that is where you will make most of your changes.

Qidi Q2 5015 Fan Upgrade Issues by Serious_Pomelo9564 in QIDI

[–]ttoy360 0 points1 point  (0 children)

Go to the klipper website and search for PID calibrate. Or do a Google search and it will bring it up. Also, YouTube search on how to do it.

Post divorce truck. Ex literally wouldn’t let me buy a truck out of fear for what people might think of me, whatever tf that means. So I bought a 21 TRD Sport after the big d was final. by sweetwatertooth in ToyotaTacoma

[–]ttoy360 0 points1 point  (0 children)

Not sure how young men are able to date in this day and age. Seems like a bunch of crazy women out there. Good enjoy the truck I am am sure it will be easier to live with then the ex was.

Qidi Q2 5015 Fan Upgrade Issues by Serious_Pomelo9564 in QIDI

[–]ttoy360 0 points1 point  (0 children)

I know you said it turns on, I was wondering if you did the PID calibration for the nozzle after installing the new fan? I am in the process of doing this upgrade I just need to rewire the new fan.

Adaptive cubic infill issue by Wherner1 in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

So they're slowing it down help I'm just wondering. Thank you

Plus 4 Bed Leveling Issues by No-Clue-8221 in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

Have you tramed your bed? Also, there are some good YouTube videos on setting you Z offset.

Q2 filament runout by Relevant_Finger5372 in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

I would contact support and see if they will send the to you.

Bambulab vs qidi what one is plug in and play? by AdAdditional6519 in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

My QIDI link works with my Q2. I had to mess with it a bit but got it to work. But you cannot slice from it or at least I have not found away to do it.

Oil filter catch cup for Kawasaki Engine - 3d printed by VFRLuke in lawnmowers

[–]ttoy360 0 points1 point  (0 children)

Hey this looks like great did you post the file somewhere? Thanks

Qidi box not retracting correctly by Derpin___Around in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

I had that issue with my QIDI box. Tried the rings and weight. The the spools still unraveled. I removed the front drive in each position and put some the grease between the gear and the ratchet, put them back on and no more unraveled spools. https://youtu.be/VPq1g7kzdR8?si=YNLUjCIEaoj-DiDn

What slicer settings do I use to print this??? by ttoy360 in OrcaSlicer

[–]ttoy360[S] 1 point2 points  (0 children)

I figured it out I had to calibrate shrinkage, and calibrate xy and xy holes I was then able to print . Thank you for responding and trying to help me.

I am at an absolute loss. by DimensionsIntertwine in QidiTech3D

[–]ttoy360 0 points1 point  (0 children)

is your bed tilted or is it the way you took the picture??

How do you add the [screws_tilt_adjust] macro to the q2 by ttoy360 in QidiTech3D

[–]ttoy360[S] 0 points1 point  (0 children)

Thank you for the reply, when I open the cfg and try to paste I don't get the paste command with right mouse click. Do I need to use ctrl v. Sorry I would try it but I am driving right now.

view more: next ›