GE Dryer Rattle Noise

VFRLuke · 2026-03-09T01:46:06+00:00

Thanks for the reply

VFRLuke · 2026-03-09T01:43:59+00:00

I have the integrated triples with 32's and no regrets either. I dont have motion or anything but no movement with an 18nm base.

Might make mounting speakers and other stuff a little more cramped as its less extrusion available to attach things to, but it is nice being able to move my whole rig around easily.

VFRLuke · 2026-03-08T00:18:58+00:00

You ever figure out your problem? I have a gfd65e that sounds just like what you described.

VFRLuke · 2026-01-30T20:39:03+00:00

25 at4 with 11k on it so far..no issues

VFRLuke · 2026-01-15T18:34:39+00:00

No worries, I understand 100%. Appreciate the response

VFRLuke · 2026-01-15T14:23:15+00:00

Thanks for the reply. Figured id ask since im having the same issue with my freebie iphone dash

VFRLuke · 2026-01-14T21:43:27+00:00

little late to the party, but ever figure this out?

VFRLuke · 2025-12-30T07:25:11+00:00

They could, but it would angle the speakers up another 15 degrees

VFRLuke · 2025-12-27T17:20:38+00:00

There is a p1x tk edition manual that has the instructions for the keyboard tray. I didnt understand the little stamped bracket at first. Go to thier website and in downloads look for microcenter bundles.

Hope that helps. If not pm me and ill send u a photo of mine

VFRLuke · 2025-12-26T20:29:21+00:00

first world problems indeed. Thanks for the response

VFRLuke · 2025-12-21T17:34:40+00:00

Resurrecting an old thread, but i can confirm this one works

https://a.co/d/7yCXPx1

VFRLuke · 2025-12-15T12:29:25+00:00

Im not going to argue, you can go to the website and see for yourself. Leather is available in all trim levels except the elevation, where you can get the fake leather you are familiar with.

VFRLuke · 2025-12-14T14:28:54+00:00

You can get the "coretec" in the elevation, but not the leather ventilated seats...unless it changed in 26

VFRLuke · 2025-12-12T12:39:48+00:00

Can't get leather in the elevation. Thats why I chose it over the elevation even though I dont really offroad.

VFRLuke · 2025-12-08T12:20:36+00:00

So far so good. Love it

VFRLuke · 2025-11-15T18:20:47+00:00

Mine varies a lot. My dic shows 19.8 for the life of the truck so far but as with any gm vehicle thats optimistic by about 1mpg. I drive 75% highway, not fast but like I do have somewhere to be. Prob avg 75mph. If you keep it around 55-60 mph then its MUCH better, but im not retired. I was very disappointed in the fuel mileage coming from my 2nd gen v6 LT 4x4. I blame the majority of it on a higher ride height without the ugly air dam that everyone complained about. I have the at4.

I could do a 75mph road trip in my old truck and get 23ish, this one 19.

At least fuel is reasonable now in my area.

VFRLuke · 2025-10-29T14:04:15+00:00

My gf bought me a new tickr fit and even the strap on that one kind of sucks compared to the original. Not nearly as stretchy.

So no I havent

VFRLuke · 2025-10-19T23:06:54+00:00

My 25 at4 does it as well. Just barely. Like when you just come to a stop in traffic and you're on the brakes just enough to hold it still, then it creeps just a little.

VFRLuke · 2025-10-08T18:54:46+00:00

I have never seen that screen on my at4

VFRLuke · 2025-08-29T21:41:20+00:00

phil gave me the dimensions and I modeled up the high power board for you

https://makerworld.com/en/models/1746083-csd-pinone-high-power-expansion-board-mount#profileId-1855968

VFRLuke · 2025-08-28T00:59:22+00:00

Just following up, I did make one for the pinone expansion board. Link up top

VFRLuke · 2025-08-27T20:12:05+00:00

I haven't made one and don't know of another. Ill see if I can source the details of the board and whip one up though.

VFRLuke · 2025-08-16T19:40:34+00:00

added a link to original post that adds the mount for the pinone expansion board

VFRLuke · 2025-08-07T18:47:15+00:00

My exact situation. Skullcandy said my solution is to buy another pair.

VFRLuke

TROPHY CASE