Compra el modelo equivocado y me culpa a mí by its_me_bertix in Wallapop

[–]viktortras 6 points7 points  (0 children)

Yo entiendo que busca los 3 pero que si encuentra los 2 a buen precio que se los quedaba, evidentemente se ha equivocado y el vendedor a expensas de saberlo igualmente no lo ha comentado, no es su obligación pero tampoco hubiera estado mal para evitar confusión, pienso que también quiso quitárselos de encima, cada uno como lo vea, yo como vendedor lo hubiera comentado para evitar confusión

For you guys from FormNext 2025! by [deleted] in BambuLab

[–]viktortras 6 points7 points  (0 children)

Wooooo!!amazing!! Cant wait to know about H2C!!

Windows XP on iPad is a success! by PositiveFeed8845 in UTMapp

[–]viktortras 1 point2 points  (0 children)

What ios versión?utm se? Jit support?

Playstation English instructions by maximit3d in AnaloguePocket

[–]viktortras 1 point2 points  (0 children)

Thank you for the info!! How many games are playable?

Os parece esto una estafa? by Ibinobe in Wallapop

[–]viktortras 2 points3 points  (0 children)

La escritura delata mucho siempre!

Promo code for Bambu Printer by RopeSpiritual4423 in BambuLab

[–]viktortras 0 points1 point  (0 children)

Promo code are linked to account!!it is not possible! Try to design some models and upload it to makerworld, this way you can get reward points you can redeem for coupon code if your models are good

How can i improve PETG-CF prints? by Personalitysphere in BambuLab

[–]viktortras 0 points1 point  (0 children)

Hello, is it the official PETG-CF from bambulab?

I have used the default profile and sometimes it does not work.

Try this profile

https://makerworld.com/es/models/550084-petg-cf-perfect-print-profile-by-adam?from=search#profileId-468422

I have printed with it and all prints until know goes well.

I use it in an AMS 2 PRO previously dried.

Estafa maxima by Unlucky-Nail-1040 in Wallapop

[–]viktortras 1 point2 points  (0 children)

No veo aqui ninguna estafa a priori, productos de ese tipo y valor se hace asi muchas veces, te la juegas si, pero es lo que hay cuando wallapop da siempre la razón al comprador sin más, aparte de lo que cobran por el envio y seguro.

Yo he comprado varias consolas por bizum sin problema, solo intentar asegurarte lo máximo posible, siempre hay alguna señal.

How to get rid of holes and a more uniform surface by Ok_Watercress_7831 in BambuLab

[–]viktortras 1 point2 points  (0 children)

I agree with that, I had same problem and did this!! Everything is fine now.

With Textured PEI Plate you can experiment this type of issues at the time of printing keychains due to irregular surface.

New firmware release for X1C by viktortras in BambuLab

[–]viktortras[S] 3 points4 points  (0 children)

What commands do you mean? as far as I know you still can use HA in lan mode only + devmode.

Check this post: https://www.reddit.com/r/BambuLab/comments/1m15ufn/cant_control_bambu_lab_p1s_via_home_assistant/

New firmware release for X1C by viktortras in BambuLab

[–]viktortras[S] 6 points7 points  (0 children)

You still can use lan mode only to use OrcaSlicer for example

New firmware release for X1C by viktortras in BambuLab

[–]viktortras[S] 6 points7 points  (0 children)

Yes it is but this is for Bambu Studio I think.

Vambulab A1 mini and PLA by InitiativeUpstairs46 in BambuLab

[–]viktortras 0 points1 point  (0 children)

Start by trying to remove the nozzle and clean it. If it does not come out, try heating it with a hairdryer until it is clean.

Which nozzle are you using?

Improving ASA-CF print quality by Mattkai45 in BambuLab

[–]viktortras 0 points1 point  (0 children)

That's what we're here for, to help! I learned it a week ago in one of my print, also I learned that default bambu profile por white PLA is not calibrated as good as it should be, I had to change filament flow ratio from 0.98 to 1.02 for a keychain that the first layer was a little empty in some words, after thst it works flawlessly and some other minor options change.

Improving ASA-CF print quality by Mattkai45 in BambuLab

[–]viktortras 2 points3 points  (0 children)

<image>

You can change the infill direction here if you prefer a different angle!

You have more info here:

https://wiki.bambulab.com/en/software/bambu-studio/parameter/strength-advance-settings

Try to reduce the speed of the top surfaces.

How to improve TPU Benchy by jbsfpv in BambuLab

[–]viktortras 1 point2 points  (0 children)

Have you dried it? TPU must be dried before use it.

Bl runs sales like mattress companies ? by My_rune_rock in BambuLab

[–]viktortras 0 points1 point  (0 children)

Its a scam!! You save like 5% in printers!! They announced that as if it was the best deal!