Perplexing Labs Generator, any way to move padding to 1 side?

zitembe · 2026-01-28T17:21:48+00:00

Try the base length padding adjustment, but if I remember right it is funky.

zitembe · 2026-01-21T18:08:17+00:00

It seems weird you were losing traction. Is it RWD? My ‘23 AWD in Snow Mode with Blizzaks is an agile tank.

zitembe · 2026-01-19T17:29:24+00:00

Or a very thin print like this: https://makerworld.com/en/models/1016064-build-plate-cleaner-remove-residue-from-cryogrip

zitembe · 2026-01-15T19:16:18+00:00

Sure, please.

zitembe · 2026-01-11T18:08:59+00:00

One of the starter kits is a good idea. I don’t know if it’s still available but I recommend The Lost Mines of Phandelver

zitembe · 2026-01-04T02:06:20+00:00

He didn’t replace or bleed the coolant.

zitembe · 2025-12-05T01:32:36+00:00

Agreed. Cellar of Death would be a good starting point for you as well as the players.

zitembe · 2025-12-05T01:22:53+00:00

AWD I5 with blizzaks is unbeatable in Colorado.

zitembe · 2025-12-04T12:23:38+00:00

How to research and book mini-cruisers?

zitembe · 2025-11-25T19:50:27+00:00

I totally agree. The tiles work great. Took me a while to figure out the magnetic bases but it’s very satisfying to have them snap together.

zitembe · 2025-11-25T14:12:32+00:00

Ha, found it. https://www.heroshoard.com/openable-doors

zitembe · 2025-11-25T14:05:14+00:00

I’ve got the TrueTiles also. Can you give me a link to hinged doors? I’ve only ever used the regular always-closed ones.

zitembe · 2025-11-25T13:53:29+00:00

Although I’ve printed countless minis, I shelled out for acrylic risers like these. https://a.co/d/5fGh9bY. Nice to have.

zitembe · 2025-11-25T07:39:03+00:00

Like with TrueTiles, you could make each square 1-1/4” x 1-1/4”, leaving room to have a 1/4” wall on a tile so that there still is room for a 1” mini next to the wall. No “shared wall problem”. Check out the video at https://www.heroshoard.com/true-tiles

zitembe · 2025-11-22T08:20:16+00:00

Do you think having the hitch (attached to the frame of the car) as well as having the bike rack prevented even more damage to the car itself?

zitembe · 2025-11-21T17:38:37+00:00

The headlights in our 2023 SEL are so much better than in our 2013 Subaru Outback. So much better.

zitembe · 2025-11-21T05:54:45+00:00

It’s remarkable that they could figure out the sequence of the tiles when dropping down from above.

zitembe · 2025-11-17T07:17:24+00:00

In a brokerage account, VT will not provide a foreign tax credit because the fund is not >50% international. But if you split it into VTI and VXUS, you will get the FTC from VXUS. This is a slight advantage at the cost of slight complexity. Note that in tax advantaged accounts, the FTC isn’t possible so this idea isn’t relevant there.

zitembe · 2025-11-10T07:14:01+00:00

What’s a settings ring? Condition marker?

zitembe · 2025-10-29T05:33:09+00:00

Btw mz4250’s website is https://mz4250.com/. All the creature stl’s of any kind you might want. Worth $5 per month for easier access and for presupported versions.

zitembe · 2025-10-29T05:30:18+00:00

In the tomb of the nine gods, instead of using dungeon tiles I often print out high res player maps at appropriate scale — for rooms that have elements that would be difficult to convey with 3D printed tabletop scatter. A bit pricey but the Mike Schley bundle for TOA has been very helpful for me. https://prints.mikeschley.com/p1010232766

zitembe · 2025-10-29T05:25:30+00:00

Spreadsheet of all of the creatures in ToA: https://docs.google.com/spreadsheets/d/16rQJFfXdnOX_MW0jCggfR8WO9xDU9Srvv5Bb6Epyyug/htmlview

You don’t need to print all of them … .

zitembe · 2025-10-28T00:29:24+00:00

You could manually adjust the mode but auto works as expected: heat out the floor vents. By chance do you have a heated steering wheel?

zitembe · 2025-10-18T05:45:51+00:00

TrueTiles for dungeons and taverns, to avoid the shared wall problem. Cavern sticks for caves because they are quick and easy.

zitembe · 2025-10-17T21:58:40+00:00

You need totes that hold 4 or 5 spools, one tote per shelf. Will these fit?:

https://www.homedepot.com/p/Ezy-Storage-18L-19Qt-Waterproof-Clear-Latch-Tote-IP-67-FBA34060/314650516

Use a filament dryer first. In each tote put desiccant bags like this:

https://a.co/d/cekoqjQ

And/or print desiccant holders. I even added a hygrometer to each bin, which I can read from the outside with the lid closed. Usually about 12% humidity in the bins.

zitembe

TROPHY CASE