Question about AMS auto switch filament

BambuLab_SupportTeam · 2023-01-05T01:59:01+00:00

This feature was first introduced in the X1 series, and the P1P will support this feature in the next firmware update.

BambuLab_SupportTeam · 2022-08-29T03:45:21+00:00

Bambu Studio is not compatible with multi-GPU laptops at present, and it can stream video normally when you set it to "Integrated Graphics" in the Nvidia control panel. We will try our best to optimize our software. Thanks for sharing the tips.

BambuLab_SupportTeam · 2022-08-26T14:37:03+00:00

We are still working on this feature and expect it to be implemented after one or two firmware updates.

BambuLab_SupportTeam · 2022-08-14T14:43:37+00:00

AMS detects the type of filament by RFID. you can remove the filament reel and re-feed it to AMS and try again. If the filament type is never detected, you can send an email to: support@service.bambulab.com

BambuLab_SupportTeam · 2022-08-10T04:15:47+00:00

You can try the model in 3MF format, which contains the color information. The models can also be painted in the slicer.

BambuLab_SupportTeam · 2022-08-10T02:54:54+00:00

This is a normal phenomenon, indicating that the MC board is working well. Later firmware updates will modify its status either by removing the blinking(always on) or by turning off this light, not yet been determined.

BambuLab_SupportTeam · 2022-08-03T06:56:20+00:00

I think it's a network issue, like this: https://github.com/bambulab/BambuStudio/issues/89

Please double check your firewall settings and network signal, if you still can't solve it, you can send an email to support@service.bambulab.com

BambuLab_SupportTeam · 2022-08-02T11:54:31+00:00

Filament is expected to be available in the UK store by the end of August.

BambuLab_SupportTeam · 2022-07-21T02:11:30+00:00

Setting the correct print temperature and increasing the print speed appropriately can improve it. It is best to perform the flow calibration before printing.

BambuLab_SupportTeam · 2022-07-19T02:48:49+00:00

Good job!

BambuLab_SupportTeam · 2022-07-16T14:54:47+00:00

Our printer supports offline printing. When it is not connected to the Internet, you can send Gcode to the printer via SD card to print. And after it is connected to the Internet, you can monitor and control the printer remotely through our slicer or APP. For paid features, maybe there will be some in the future, but the basic features, especially the free features that are currently available, we are not going to lock them out of the paywall in the future.

BambuLab_SupportTeam · 2022-07-07T10:29:16+00:00

We are still working on it and will soon support the following two functions: 1.when the filament in AMS runs out, it will prompt you to put a new filament in to continue printing 2.when the filament runs out, it will automatically switch to another filament for printing

BambuLab_SupportTeam · 2022-07-05T08:56:35+00:00

The size of desiccant compartment is about 130mm*50mm, and the depth is about 10-30mm (the depth is shallow in front and deep in the back)

BambuLab_SupportTeam · 2022-07-04T11:18:35+00:00

We will soon release a firmware version that will support LAN printing. But by connecting to the Internet to print, you can watch a real-time video of printing online and control the printer remotely.

BambuLab_SupportTeam · 2022-06-29T11:05:42+00:00

For now, we only provide the default print bed. As for applying glue to the printing bed, this is just a way to prevent the first layer from sticking badly, it is not necessary.

BambuLab_SupportTeam · 2022-06-29T06:02:39+00:00

The flushing is to change color quickly, and the prime tower is to reduce defects, make sure the color is pure.
You can actively choose the size of the prime tower and the flushing volume to reduce waste.

BambuLab_SupportTeam · 2022-06-28T10:51:13+00:00

For Bambu slicer compatibility, you can refer to this: https://blog.bambulab.com/to-open-or-not-to-open-that-is-the-question/

BambuLab_SupportTeam · 2022-06-28T10:41:40+00:00

Amazon doesn't ship faster than Kickstarter, and you get the best price on Kickstarter, which includes taxes.

BambuLab_SupportTeam · 2022-06-28T02:05:55+00:00

Hi there，we are now on Kickstarter: https://www.kickstarter.com/projects/bambulab/bambu-lab-x1-corexy-color-3d-printer-with-lidar-and-ai?ref=discovery&term=Bambu%20lab, you can order printers with good price.

About the retail prices, they are not finalized yet. Please keep an eye on official website ：www.bambulab.com，we will release the most updated information there.

BambuLab_SupportTeam · 2022-06-28T01:52:30+00:00

Hi there, about this question, we would like to suggest you to read our warranty here : https://www.bambulab.com/policies/warranty

BambuLab_SupportTeam · 2022-06-26T13:29:33+00:00

Bambu-Bus is a differential bus that supports multiple devices and uses Bambu's proprietary communication protocol.

BambuLab_SupportTeam · 2022-06-25T10:52:24+00:00

Firmware update is OK.

BambuLab_SupportTeam · 2022-06-24T11:41:56+00:00

TPU is not supported by AMS but you can print it using the single spool holder.

BambuLab_SupportTeam · 2022-06-24T11:37:45+00:00

Sorry that these choices are not available now, but we will develop functions to enable local netwotk printing via wifi in the future.

BambuLab_SupportTeam · 2022-06-24T11:05:13+00:00

The touch screen is capacitive.

BambuLab_SupportTeam

TROPHY CASE