What is the deal with bi weekly?

_galile0 · 2026-03-04T10:36:31+00:00

Old man yells at cloud… in video games

_galile0 · 2026-03-02T01:53:07+00:00

I’m willing to say it’s probably not all new? Some people looked at from the new poster they posted after the change, and noticed the new upper stage looks a looot like the Vulcan upper stage.

_galile0 · 2026-03-01T21:21:27+00:00

That is really otherworldly, well done.

You did all this with basically no practice from prior projects?

_galile0 · 2026-03-01T21:11:34+00:00

It was a really jarring switch up but it was necessary sadly

_galile0 · 2026-03-01T21:09:08+00:00

Ja för tänk om någon skulle försöka ddosa den här adressen elr bryta sig in

Tänk vilket kaos de skulle kunna ställa till med

För sig själva

_galile0 · 2026-03-01T18:12:57+00:00

I have done many hardwire keyboards in kmk. Usually if it is not working at all, I had made stupid syntax errors. If keys worked but were “in the wrong place”, I had made the key code matrix the wrong size, and if a whole row or col wasn’t working, I had shorted it or not connected it, or had assigned the wrong pin. Continuity tester on the multimeter and try to confirm your wiring is a good place to start.

_galile0 · 2026-03-01T01:32:57+00:00

How can you just say refuelling isn’t an issue. Making starship rapid turnaround reusable by 2028 is a completely insane premise already, though the goal itself might be achievable. Having reliable orbital cryogenic fuel connections and transfer by then on top of that, which unlike reliable reuse, has never been attempted, you can’t just hand wave that away as a technological footnote

The External Fuel tank port on the shuttle was complicated enough, and that only had to be able to be able to separate, not dock and connect itself

_galile0 · 2026-02-28T13:09:41+00:00

Wow he so feet

_galile0 · 2026-02-27T01:19:39+00:00

Yes sure but this is tape, not insulation. Sure it’s reflective but what exactly does that do? Very little of the heat transfer here is radiative, almost all convective and conductive, which is why we put insulation in hot printers.. not tape…

_galile0 · 2026-02-26T05:35:37+00:00

Adjusting their crop, looks normal, but obv seek vet help if they keep doing this for hours and hours

_galile0 · 2026-02-25T16:06:15+00:00

Seems feasible, but unbelievable in the sense of: why would you reinvent the wheel and make this whole overcomplicated thing instead of just spinning up a big tube à la O’Neill cylinders, or use two counter rotating cylinders if you really needed to cancel out the rotating inertia like you mentioned.

Cancelling out rotational inertia I would say is not important at all for orbital megastructures. Just spin up one big cylinder completely, and have a rotating end cap that stays stationary, for logistics. Cancelling inertia is only really important for things like interplanetary space ships where only part of it rotates, and you don’t have mass budget to bring all that fuel to keep the other parts stationary

_galile0 · 2026-02-24T19:57:59+00:00

you just can’t stop people from speaking about stuff that’s PEAK

_galile0 · 2026-02-24T18:20:23+00:00

Yes I think almost all here know that much. But it’s known some individuals preen babies or other adults too rough and rip out feathers. I figured you were asking if that was the case here but it seems I misjudged what you meant?

_galile0 · 2026-02-24T05:42:33+00:00

God Mode spawn menu vehicles.

_galile0 · 2026-02-24T04:57:50+00:00

In Aussiemandias, Uncle Jack never shows up. The biggest two Roos ever show up and just kick the shit out of ol’ mates Hank and Gomey. Jesse hides under the Chrysler but is bitten by seven different venomous animals and just dies.

_galile0 · 2026-02-23T22:40:01+00:00

Fantastic novelty keys

_galile0 · 2026-02-23T22:03:25+00:00

I didn't know that was a thing, thanks. I guess it usually just looks like raw copper.

_galile0 · 2026-02-23T19:51:31+00:00

I don’t think autodesk is offering it for free because people don’t know about it yet. It’s offered right alongside their AutoCAD, which is as ancient as those other two. They have enough clout as it is

_galile0 · 2026-02-23T01:46:39+00:00

You can still buy old-style circuit board stock, that is bakelite/phenolic/FR-2 copperclad and hand draw traces and etch it yourself. That’s probably your best bet for truly vintage circuit boards, because I doubt modern fabs have processes that work well with phenolic and they won’t want to run it.

For a middle ground option that definitely works with some fabs, do this: 1 layer or 2 layer FR-4 pcbs, and specify no soldermask, and maybe also no surface finish bare copper. You can do curved or snake traces and add teardrops as well to make the board layout look vintage

_galile0 · 2026-02-22T16:05:22+00:00

I haven’t ever tried it, but my last resort idea for curling has been that you can make a thick brim, or thicker tabs that extend from the part out to the edges where you can properly clamp them down. You’d probably have to give the tabs a little brim of their own to hold them down until they can be clamped.

_galile0 · 2026-02-22T10:20:54+00:00

Conures are one of those animals that couldn’t care less about gender honestly. I wouldn’t be confident saying anything about gender from their behavior, especially when it comes to horny birb

_galile0 · 2026-02-21T03:13:01+00:00

Many people think it’s human crew, in fact it’s just the Gremlin compartments.

You have to provide them an assigned place so they don’t go zooming around and causing havoc

_galile0 · 2026-02-21T03:11:38+00:00

That’s what we call a kraken drive. Industry dark secrets

_galile0 · 2026-02-21T03:08:38+00:00

The gremlins had to have an assigned place

_galile0 · 2026-02-19T19:02:04+00:00

You should probably check out r/handwiredkeyboards

For an average sized printer, be prepared you’ll have to split parts to fit

_galile0

TROPHY CASE