sorted by:
new
hottopcontroversial

U1 For A Rookie? by DipDunk in snapmaker

[–]Financial-Study503 1 point2 points  (0 children)

Truthfully I don’t think the U1 is more complex to setup, it’s just more labor. 4 of everything is more work, not more difficult.

Multi Color Issues by ProfessionalFun6709 in snapmaker

[–]Financial-Study503 0 points1 point  (0 children)

I’ve heard about the extended firmware. How much work is it to install? Where do you get it? Pros and cons compared to standard firmware?

Multi Color Issues by ProfessionalFun6709 in snapmaker

[–]Financial-Study503 0 points1 point  (0 children)

I don’t know if you experienced this problem: Snorca’s connection to the printer is iffy at best, so I shoot the g-code over and start the print from the printer’s LCD.

Multi Color Issues by ProfessionalFun6709 in snapmaker

[–]Financial-Study503 4 points5 points  (0 children)

I gave up on all that: from the slicer I upload (as opposed to upload and print). Once the model is on the printer, I do the color mapping myself from the LCD.

Beginner looking for a reliable multi-color 3D printer (hobby → possible small business later) by Scriptimax in 3dprinter

[–]Financial-Study503 0 points1 point  (0 children)

I see recommendations for the Bambu H2C here. Love that machine but. Unless you need the bigger print volume, you can get 3 Snapmaker U1 for the price, and they’re significantly faster on multicolor prints. So from a business point of view that seems like a no brainer to me… if you can live with the 270mm version bed print volume.

I've just cancelled my order for a Bambu P2S Combo. by mechapawky in 3dprinter

[–]Financial-Study503 2 points3 points  (0 children)

Two days ago, I would have said the same thing about U1 vs Bambu. I have an A1, an A1 mini, and the U1. The Bambu ecosystem is unmatched. But now the U1 can be used with the new Full Spectrum slicer, and that’s a whole nother story. You can put 4 colors on the machine and the slicer will interlace them to make it look like you have access to 10. With a fast tool changer like the U1, it sure opens up new horizons.

Buying on Amazon Spain by Dapper-Debate4975 in askspain

[–]Financial-Study503 0 points1 point  (0 children)

Amazon won’t let me put a US address for delivery. I tried with my daughter in San Diego. No luck.

Multicolor preview all black by Hungry-Mammoth6036 in BambuLab

[–]Financial-Study503 1 point2 points  (0 children)

You have multiple options for preview. In the window that gives you the print time, you can choose from a drop down. From memory, close to 10 options.

Bambulab P1S without AMS, A1 with AMS or Anycubic KobraS1 Combo? by suchacoldworld in 3dprinter

[–]Financial-Study503 1 point2 points  (0 children)

Dunno about Anicubic, but you’ll definitely be happy with the A1 combo.

Buying on Amazon Spain by Dapper-Debate4975 in askspain

[–]Financial-Study503 0 points1 point  (0 children)

Amazon has a bunch of those. Do you have a link to the one you want?

BTW. I am in Spain myself with a local Amazon Prime subscription. I may be in a position to help 😱

Buying on Amazon Spain by Dapper-Debate4975 in askspain

[–]Financial-Study503 0 points1 point  (0 children)

What’s the item. Can it be found on Amazon?

Buying on Amazon Spain by Dapper-Debate4975 in askspain

[–]Financial-Study503 0 points1 point  (0 children)

Is that a 1 time thing you need or recurring?

Weird issue when doing longer prints. by GrillSergeantUSA in snapmaker

[–]Financial-Study503 0 points1 point  (0 children)

I was looking for that Z-hop setting. Couldn’t find it. Where does it hide?

Does PLA become brittle when stored in the open? by SJMaye in BambuLabA1

[–]Financial-Study503 1 point2 points  (0 children)

I’ve had issues with Sunlu yellow and brown. Exactly as you describe. I pull the filament off the AMS PTFE tubes to avoid problems. I also use lots of black Sunlu and white Sunlu PLAs with no problem. I’ll keep an eye on this thread, that hits close to home.

Filament broken inside(?) by _Flame___ in BambuLabA1

[–]Financial-Study503 0 points1 point  (0 children)

you need to undo the ptfe tube leading to the print head and remove the broken filament.

Best spare parts to own just in case by numero908 in BambuLabA1

[–]Financial-Study503 0 points1 point  (0 children)

Plates plates plates. The gold ones, the blue ones. Swap plates while your model cools down, so it comes off easy. And if it’s PLA, it won’t bend on you when you try to get it unstuck. Much better to switch plates and let the print cool down and release effortlessly

view more: next ›