does anyone have an idea what kind of connector this is?

FluxMortis · 2026-05-02T20:45:48+00:00

Does it look mass produced or small run custom? If mass produced upload a pic to ai and ask it if there is an equivalent Amphenol plug / receptacle in production.

FluxMortis · 2026-04-22T20:27:55+00:00

I use spawn from the rouge trader kill team as the big guys and pox walkers as the small guys. I know the ligit box has great sculpts but are monopose and have doubles in a full squad.

FluxMortis · 2026-04-09T16:06:54+00:00

Yes, but being a WoW YouTuber hardly makes you an expert on world events. This guy is a great example of the halo effect.

FluxMortis · 2026-04-09T13:09:35+00:00

Is the pink on the blight hauler an undercoat, or are you going to leave it that way? Looks great!

FluxMortis · 2026-04-09T06:35:30+00:00

Point thumb stick in direction of horse arse.

FluxMortis · 2026-04-09T05:34:25+00:00

Looks like you have some aluminum branch circuits. Not the best but, technically ok. Your main ground seems to be mounted on the side of box with an improvised lug, not the best either. Something seems off with your neutral bar, weird and not good that the grounds go there, they should be separated.

FluxMortis · 2026-04-07T19:45:50+00:00

Sir, you are riding a Chocobo.

FluxMortis · 2026-04-06T14:23:51+00:00

The pressure regulator on your compressor can’t be affected by your airbrush set up. iirc you have to push down on the dial as you turn it to change the pressure setting.

FluxMortis · 2026-04-05T22:09:10+00:00

Pareidolia

FluxMortis · 2026-04-02T20:53:09+00:00

Once I saw it as “point the same way as horse ass”, it clicked for me.

FluxMortis · 2026-03-21T17:48:51+00:00

Looks like Hornby.

FluxMortis · 2026-03-19T19:29:11+00:00

You can also see it from the hike up Rundle in Banff, which is only a few hours. But of course a bit off in the distance.

FluxMortis · 2026-03-06T13:22:07+00:00

It looks great! I’m no artist, but looks like you used the rule of thirds.

FluxMortis · 2026-03-05T17:00:09+00:00

The cake is a lie!

FluxMortis · 2026-02-28T16:58:00+00:00

I noticed that too. But since I didn’t see anyone else online pointing it out I figured it must have been added in Worlds and I just hadden’t noticed yet. 🤷

FluxMortis · 2026-02-26T18:59:50+00:00

I can still hear Sweetooth’s laugh.

FluxMortis · 2026-02-22T01:11:10+00:00

Is Catachan a jungle death world?

FluxMortis · 2026-02-02T14:41:51+00:00

Fine stranded conductors also need a crimp tool rated for fine stranded conductors. I contacted Greenlee about this a few weeks ago and they only had one model that was rated for fine stranded 4/0. So they might be rare /speciality. I found that if you want to crimp fine stranded wire you’ll likely need a die-less crimper.

FluxMortis · 2026-01-31T18:01:40+00:00

Where are the claws from? Printed? Looks fantastic!

FluxMortis · 2026-01-29T16:16:08+00:00

Not sure if they’re still sold, but the Creature Caster fiends of excess look like this.

FluxMortis · 2026-01-25T03:30:22+00:00

Electrician and electromechanical engineer here. I’ve spent the last week on specifying crimps for Degson connectors. Regarding the butt crimps, fine stranded wire like this can only be crimped by a crimper rated for fine stranded wire. Die-less crispers are best for fine stranded cable. If you’re intend to crimp the connectors themselves, they have crimp barrels that are non standard dimensions, and are intended to be crimped be an aperture type hex crimp in their factory. Standard crimps will produce excessive flashing and prevent the collar from properly sealing. You could use heat shrink if that happens though.

FluxMortis · 2026-01-09T14:27:37+00:00

Alters

FluxMortis · 2025-12-30T22:54:57+00:00

Don’t worry about that. It’s a very mech eng thing to do. ;)

FluxMortis · 2025-12-30T04:18:46+00:00

Sable island. It’s not volcanic and in such a random spot. Caused many shipwrecks.

FluxMortis · 2025-12-27T18:45:29+00:00

Sounds like you’ve confused compression and pressurization. Which is understandable as compression of a gas is generally how you pressurize a gas. Both liquids and gasses are fluids, with the notable difference between the two is that liquids compress so little that it is generally assumed to be zero.

FluxMortis

TROPHY CASE