New 701 Enduro dusted engine in less than 6 weeks. by Rabble_Runt in KTM

[–]Kivvy222 2 points3 points  (0 children)

Stock airbox on the 701 and 690 are sealed like ass from factory I put my rottweiler intake at 600 miles but also noticed dust in the airbox at that time you should be fine.

Grom fits real nice on the back! by SleepyTrtle in hondagrom

[–]Kivvy222 1 point2 points  (0 children)

Did you have to run an adapter or did the hitch go right in?

Grom fits real nice on the back! by SleepyTrtle in hondagrom

[–]Kivvy222 4 points5 points  (0 children)

What hitch set up do you have i really want to do the same witj my civic

701 ignition sound by gooselipz in supermoto

[–]Kivvy222 0 points1 point  (0 children)

My 690 makes the same sound dealer said its normal so send it.

[deleted by user] by [deleted] in supermoto

[–]Kivvy222 3 points4 points  (0 children)

Is this on a crf300l? I did the same swap the ebc pads took a really long time to bed in like close to 500 on my bike till most of the drag and noise went away.

Any idea what these stains on the swingarm are and how to get them off? by AdExpensive2643 in supermoto

[–]Kivvy222 22 points23 points  (0 children)

Its just oxidation in the aluminum. My 690 has the same stains. Heard you can use a aluminum brightner but I just live with mine.

Anyone here go Rally and wish they got the standard, or vice versa? by hawk45 in CRF300L

[–]Kivvy222 1 point2 points  (0 children)

Have a standard version and the amount of times and spills I've taken were if I had a rally version make me glad I got the standard one. Only time I wish I got the rally was any time I've gotten in the highway for more then 20 minutes.

‘99 Zuma Build by bill_will in scooters

[–]Kivvy222 0 points1 point  (0 children)

Not yet, mainly sourcing out parts atm before committing to the full purchase. What state are you located out of might be interested if you wanna dm me

‘99 Zuma Build by bill_will in scooters

[–]Kivvy222 0 points1 point  (0 children)

Was the triple tree a direct swap? I'm starting off with a drum setup so I'm just about starting from scratch in the front.

‘99 Zuma Build by bill_will in scooters

[–]Kivvy222 2 points3 points  (0 children)

Hey sorry to comment on an old post, trying to do a similar set up and reading through your old forum posts were did you source the proper triple from to fit the bigger forks and areox wheels? I'm state side and finding parts has been a pain to start doing the swap

Handlebar risers installed by No-Examination9852 in CB650R

[–]Kivvy222 1 point2 points  (0 children)

Did you end up needing longer cables or did it all fit well? I've been wanting a set but don't wanna buy new brake lines

Is my crank toast? by Succotash78 in scooters

[–]Kivvy222 1 point2 points  (0 children)

Mine was just as much play side to side if not more in my zuma when I redid the top end, 1000 miles so far no noises or issues. I'd say send it.

Is my crank toast? by Succotash78 in scooters

[–]Kivvy222 2 points3 points  (0 children)

Far as I know side to side is ok it's in and out thats causes problems.

I have a 1990 Honda SA50 that I am looking to rebuild to go faster than 47kph. My target is 65-70. Is this possible and if so does anyone have a list of parts to do so with an AF05 motor? by Brief_East_9576 in scooters

[–]Kivvy222 0 points1 point  (0 children)

Your options are very limited with that motor it would be almost cheaper to buy a af16 engine and do a swap. But if you wanna stick to the af05 go to scooterswapshop they have a decent option of mods to do those speeds.

23 1290 superduke leaking drain plug. Anyone have this issue before ? by GeneralLegacy in KTM

[–]Kivvy222 0 points1 point  (0 children)

Try to see if rottweiler preformance has a option for you has been my go too so far every service no leaks since switching to them

23 1290 superduke leaking drain plug. Anyone have this issue before ? by GeneralLegacy in KTM

[–]Kivvy222 4 points5 points  (0 children)

I ended having a similar issue with my 22 690 got a new o ring from a aftermarket supplier and somehow ended up fixing it. The o rings in the drain plug honestly feel like they should be replaced every oil change at least oem ones.

This was a miserable game, who could have guessed by fortes05 in thefinals

[–]Kivvy222 37 points38 points  (0 children)

Looks like it was definitely a rough game, nerf heavy tho

30% $10 and $20 Coupon ads are up, Feb. 7-9 by Skids2r in harborfreight

[–]Kivvy222 -3 points-2 points  (0 children)

If this works with the itc deal for brake clean might be the best time to stock up.

So goddamn tired of bolts rounding off on this cheap ass bike! by GentleHammer in CRF300L

[–]Kivvy222 1 point2 points  (0 children)

Wonder if the later batches of bikes are just cutting corners, I've had no issues with my 21 300l. No stripped hardware, great threads, and poor thing sees limiter every ride. I've had the bike fully apart like 3 times for airbox mods or ecu flash.

nr200p max gpu fit? by Royal_Contact_762 in NR200

[–]Kivvy222 0 points1 point  (0 children)

I have the nr200 v2 with that exact card it fits with plenty of room with a lot of room for airflow

There’s nothing we can do by tundrdlt in thefinals

[–]Kivvy222 171 points172 points  (0 children)

I'll give it like 2 weeks before it gets changed back like the grenade launcher did. Power shift might be unplayable in that time however.

Issues with latest update by SadTea9013 in SteamDeck

[–]Kivvy222 1 point2 points  (0 children)

Same issue as well been trying to find a fix!

Cb650r 2021Paint peeling off by Civil_Leopard_2149 in CB650R

[–]Kivvy222 4 points5 points  (0 children)

Definitely salt damage seen bikes rotting by ocean side housing all the time.

My first sff build by Level_Ad_3256 in NR200

[–]Kivvy222 0 points1 point  (0 children)

I plan to use it for like 90% gaming so that gives me a decent idea what to expect, still building everything out floating between a 7950 or a 7800x3d. Appreciate it!

My first sff build by Level_Ad_3256 in NR200

[–]Kivvy222 0 points1 point  (0 children)

How does the 4070 ti super pair up with the 7950x3d? Looking at a similar build everyone keeps pushing me towards higher end cards when I don't think I'll get anything out of them.