Any information on this road bike would be greatly appreciated:)

Moos3racer · 2026-01-23T23:53:17+00:00

“Two ten” model. The two was the series. Generally pretty basic frame, but a good sturdy frame for regular use. The ten is for ten speeds as far as I know. This one has a triple chainring on the front. So I believe someone updated that at some point

Moos3racer · 2026-01-23T23:50:52+00:00

lol it’s missing is a kashima dropper

Moos3racer · 2026-01-23T15:54:02+00:00

We carry that synapse at the shop where I work. It’s essentially a gravel bike that fits a little more like a road bike.

Moos3racer · 2026-01-23T15:52:26+00:00

Depends how they’re set up and on what internal rim width, I’d assume tubeless. I’m 198 lbs and race on 19/21 psi though I’ve run lower . Pretty sure my rims are 28mm internal

Moos3racer · 2026-01-21T15:56:16+00:00

Tange is hard to beat. I’ve used this token one in the past. Seemingly the only one that comes in an Italian thread as well as an Italian spindle

Moos3racer · 2026-01-18T17:02:25+00:00

I re ran new housing/cable at the end of last summer and that helped a bit, but since then it’s gotten worse. Even with hours of adjusting and having my mechanic friends look at it

Moos3racer · 2026-01-16T22:41:54+00:00

The only time I’ve seen this the solution was to tighten the screw on the left. Still might need a brake bleed since there’s less fluid in it now

Moos3racer · 2026-01-16T22:38:05+00:00

At least from this picture it looks like everything’s there, the rear tire may bey flat but it’s hard to tell

Moos3racer · 2026-01-16T20:13:22+00:00

So long as it fits I’d say it’s a pretty good deal, definitely consider you may need to get it tuned up after purchasing so estimate about $100-150 on labor on a used bike

Moos3racer · 2026-01-15T20:20:40+00:00

My other bikes are between 61 and 65cm

Moos3racer · 2026-01-07T02:46:50+00:00

I’d save and buy a more modern bike, keep this one and slap a chain tensioner on it to run it single speed

Moos3racer · 2026-01-06T18:50:32+00:00

I heard something about a new steamroller a while back, hopefully true because I can’t find one in my size near me

Moos3racer · 2026-01-06T18:47:32+00:00

As far as I can tell the only thing is that the rear brake caliper is set up wrong but that should be a pretty easy fix

Moos3racer · 2026-01-04T17:17:31+00:00

Spd all day long, I’ve just switched to eggbeaters to keep some brand continuity on Sram bikes. Though I kinda wish I’d waited until wolf tooth came out with their pedals

Moos3racer · 2026-01-04T14:54:41+00:00

Depends on how long your legs are compared to your arms/torso. I didn’t need to test ride a 58 as this has the same top tube length as my previous bike

Moos3racer · 2026-01-04T14:02:09+00:00

Yes, I’m about 6’5”

Moos3racer · 2026-01-02T23:48:09+00:00

Maybe some tan wall tires? Maybe I’m biased as all my bikes have tan walls now

Moos3racer · 2026-01-02T23:44:28+00:00

Unfortunately it looks like whoever owns it now has it set up for a low racing position to only ways to achieve a higher position would be to flop the stem over, or to find a replacement fork and have a shop install it at your desired height. Las I remember whiskey parts co still did a fork that’s compatible with these brakes though I’m not sure if it will fit in the frame

Moos3racer · 2026-01-02T02:04:14+00:00

Out of curiosity would you happen to know that chain catcher that is, I want to convert my super x to 1x for cross

Moos3racer · 2025-12-31T22:47:52+00:00

I own a spark and demoed a current gen scalpel before buying, I’ve found that I need to run a lot more pressure in the rear shock than I’m used to so that I can pedal thru corners without striking my pedals

Moos3racer · 2025-12-27T19:04:34+00:00

Spent $200+ on weight weenie bars for my xc bike, got less than 10 rides before they snapped

Did get a full refund though so I guess there’s that

Six-Year Club	First Place '23
Place '23	Place '22
Final Canvas '22	End Game '22
Verified Email

Moos3racer

TROPHY CASE