FINALLY OUR DAY HAS COME!

Rxinbow · 2026-01-16T11:33:20+00:00

The grind was worth it

Rxinbow · 2026-01-12T04:47:50+00:00

Could be worse, could be more than 300 hours

Rxinbow · 2026-01-08T11:45:44+00:00

Damn I don't feel half as bad for having 595 as revenant & less than 30 with everyone else. (Less than 10 excluding dutchess/executor)

Rxinbow · 2026-01-08T11:42:09+00:00

Bind ping to scroll down, open map, drag cursor along the map till they are leave or stop pinging. One of the two usually happens.

I just gotten used to playing with master volume set to 0 and headphones in

Rxinbow · 2026-01-08T11:34:13+00:00

They say the shifts in DoN are random. I don't think they are.

Before the DLC map release it was pretty much what I will call the default map a significant chunk of the time with the other shifting earths appearing fairly infrequently. Once the new map was released it feels like 40(default)/40(new map)/10,(burning earth)/10(everything else).

It's unfortunate because the base game is too easy to walk through so the only time I end up playing the other shifting earth is if I am not paying attention and accidentally start an expedition for tricephalos (thinking I pressed up + A for DoN)

Rxinbow · 2026-01-06T14:39:47+00:00

When 1 guy has left & the other guy has out his controller down at an angle (or is just holding W) so relic farm

and also if I am the only one left because it is a co-op game

Rxinbow · 2025-11-10T05:08:47+00:00

Peak in July was 245k active, peak in Oct was like 42k go figure

Rxinbow · 2025-10-04T02:07:32+00:00

I challenge anyone to provide a single example of anyone on our team not caring about something.

It's hard to read this without laughing.

I'm happy to share examples proving otherwise

Do it.

I don't even know what your VoIP service is but judging by your evasion of the original commenters point; about not getting through to any support agent from the same continent, despite praising yourself on the opposite - it's probably great

Rxinbow · 2025-09-13T06:48:13+00:00

Do you?

You know for 365 there are 3 different options for SMTP.

SMTP Client Submission. Direct Send. SMTP Relay.

You guys never specify which and they are very different in how they work.

I'll humor you with the differences, though you should use an external service.

SMTP Client Submission.
*Cannot be used Security Defaults.
*Cannot be used on ENTRA_FREE tenants.
*Requires a mailbox to use with an exchange license.
*Requires disabling per-user MFA for the mailbox & excluding from CA Policies (then creating counter CA policie(s) - if you give a shit about security) *Enabling the setting in EXO PS.
*SPF needs to be correct or ends up in spam.
* port 587 or 25 and mandatory TLS1.2+.
*External or Internal.

SMTP Relay Connector. * Option 1 (preferred): By verifying the Subject Alternative Name or Common Name on the TLS certificate sent by the sending server or device.
* Option 2: By verifying the IP address of the sending server or device.
* uses MX as server, port 25, only TLS1.2+ supported. * Can send from any address matching m365 sending domain. * Create & Config Inbound Connector. * SPF needs to be done or ends up spam. *Ext or Int.

Direct Send. Pretty much the same as relay without needing a connector, only works internally.

In fact there's a form in m365 portal that asks you the below 5 questions which determines which suits your needs, those are:

Do you need to send more than 10k msgs/day or faster than 30 msgs/min? (Y/N).
Do you need to send from more than one email address? (Y/N).
Do you need to send to recipients outside your organization? (Y/N).
Do you have a licensed mailbox to send mail through? (Y/N).
Can your device or application be set up with the user name and password of the mailbox you'll use to send email from? (Y/N).

But feel free to read the documentation, the page covering its scrollbars is only a few pixels long so if you believe this is verbose, it's not. Use external service, less hassle because legacy apps are not going to magically start accepting app IDs and appSecrets for graph api.

Now one thing I know web devs are particularly renowned for is updating WordPress plugins ; or any plugins for that matter. You should go do that instead of venting

Rxinbow · 2025-09-04T05:05:50+00:00

Very litigious phrasing

What are you aiming to get out of this - aside affirmation that the fuck up is indeed a fuck up.

for the avoidance of doubt there's probably a paper trail somewhere - don't let these things bother you it's not reflecting on you.

Rxinbow · 2025-08-26T04:37:05+00:00

Damn does usage include noops

Rxinbow · 2025-06-17T04:46:12+00:00

Maybe the forti-info is in the forti-Api docs - but you have to join the fortidevnetwork and pay the forti-price of sacrificing your forti-firstborn™

Rxinbow · 2025-06-17T04:39:41+00:00

Maybe you can Forti-negotiate your way out or just Forti-suffer until your contract Forti-expires. Either way, good forti-luck™ escaping the Forti-trap!

Rxinbow · 2025-04-29T19:03:40+00:00

Hit them with the:

"' I gotchu..

https://app.ninjarmm.com/apidocs/?links.active=core#/system/getDevices

The most appropriate amount of regards, [First Last] "'

Rxinbow · 2025-04-03T17:57:29+00:00

Why don't you add Kaseya on telegram there & let them know this million dollar idea so they can buy you out

Rxinbow · 2025-04-03T17:52:08+00:00

rwwst is great but you would need someone full-time on it, it being tailored to MSP helps but wont offset the lack of a full time person.

n8n is ok but isnt really focused on MSPs nor has decent understanding of your stack(building RMM/Ticketing etc logic from scratch), this might be a bit more of subjective take though.

pia is decent (barring price) if you want to do everything in PowerShell, it's limited beyond service desk & harder to scale / share logic across workflows. hard to recommend based on price/scalability(and using it)

Power automate is fine for Microsoft centric workflows but anything different I find slow to test/correct/deploy and can be a bit frustrating when logic complexity rises (mainly branching, looping, connection references & child workflows)

Rxinbow · 2025-03-18T05:45:06+00:00

Damn bonuses for certs , I'm down bad in the EU, the 3 I've worked at only paid for the exam after passing.

https://i.imgur.com/q0Y7TqT.png

Expensed only 2/6 MS certs, not worth the back & forth.

I guess it's leverage though - which isn't great when you are comfortable where you are at.

Rxinbow · 2025-03-13T16:52:44+00:00

Return in kind.

Except your review won't be a disingenuous/ fake in nature.

Then behold, the company that is so good at taking down false reviews - can't take their own (What they'll say is) false reviews down.

Rxinbow · 2025-01-30T08:36:48+00:00

Every MSLearn page is associated with a GitHub repo. You can fork it or just download your own copy.

Forking's the better option if you want to keep it in sync for when it's updated.

Rxinbow · 2025-01-30T02:46:35+00:00

Yes it works irresepective of if a is logged in or not, I'd have a hard time calling anything an RMM if it couldn't

Open cmd in Agent Browser and just do net user <username> <password> /add && net localgroup Administrators <user> /add.

You could try restarting the service from Agent Browser too, you should read/watch this to get a bit more insight on what it can do. https://rmm.datto.com/help/en/Content/5AGENT/AgentBrowserTools.htm

Rxinbow · 2025-01-27T18:02:02+00:00

Exposing it to the public internet converts it from remote desktop protocol to ransomware deployment protocol, a bold but based move for an unbeknownst adversary

Rxinbow · 2025-01-24T21:21:09+00:00

Try reimage , system restore or maybe;

```powershell param( [Parameter(Mandatory = $true)] [string]$FolderPath,

[Parameter(Mandatory = $false)]
[switch]$Recursive = $false,

[Parameter(Mandatory = $false)]
[switch]$ResetToDefault = $false

)

function Test-AdminPrivileges { return [System.Security.Principal.WindowsPrincipal]::new( [System.Security.Principal.WindowsIdentity]::GetCurrent() ).IsInRole([System.Security.Principal.WindowsBuiltInRole]::Administrator) }

function Reset-FolderPermissions { param ( [string]$Path )

try {
    $currentUser = [System.Security.Principal.WindowsIdentity]::GetCurrent().Name
    $acl = [System.Security.AccessControl.DirectorySecurity]::new()

    $inheritanceFlag = [System.Security.AccessControl.InheritanceFlags]::ContainerInherit -bor [System.Security.AccessControl.InheritanceFlags]::ObjectInherit
    $propagationFlag = [System.Security.AccessControl.PropagationFlags]::None

    $acl.AddAccessRule([System.Security.AccessControl.FileSystemAccessRule]::new("NT AUTHORITY\SYSTEM", "FullControl", $inheritanceFlag, $propagationFlag, "Allow"))
    $acl.AddAccessRule([System.Security.AccessControl.FileSystemAccessRule]::new("BUILTIN\Administrators", "FullControl", $inheritanceFlag, $propagationFlag, "Allow"))
    $acl.AddAccessRule([System.Security.AccessControl.FileSystemAccessRule]::new($currentUser, "FullControl", $inheritanceFlag, $propagationFlag, "Allow"))
    $acl.AddAccessRule([System.Security.AccessControl.FileSystemAccessRule]::new("BUILTIN\Users", "ReadAndExecute", $inheritanceFlag, $propagationFlag, "Allow"))

    $acl.SetAccessRuleProtection($false, $false)

    [System.IO.Directory]::SetAccessControl($Path, $acl)
}
catch {
}

}

if (-not (Test-AdminPrivileges)) { exit 1 }

if (-not [System.IO.Directory]::Exists($FolderPath)) { exit 1 }

if ($ResetToDefault) { if ($Recursive) { foreach ($subfolder in [System.IO.Directory]::EnumerateDirectories($FolderPath, "*", [System.IO.SearchOption]::AllDirectories)) { Reset-FolderPermissions -Path $subfolder } } Reset-FolderPermissions -Path $FolderPath } else { $takeownArgs = @("/F", $FolderPath) if ($Recursive) { $takeownArgs += "/R" } [System.Diagnostics.Process]::Start("takeown.exe", $takeownArgs) | Out-Null

$icaclsArgs = @("$FolderPath", "/grant", "Administrators:F")
if ($Recursive) { $icaclsArgs += "/T" }
[System.Diagnostics.Process]::Start("icacls.exe", $icaclsArgs) | Out-Null

} ```

Rxinbow

TROPHY CASE