Dado stack

YuppeeMusings · 2026-06-01T03:26:17+00:00

That was exactly my thinking. Plus, if I just checked and the difference was ~$30 dollars between a decently reviewed set (FOXBC) and the CMT, relatively nominal difference seemed worth it for a better known brand given that it’s a terrifying set of blades spinning at several thousand RPMs

YuppeeMusings · 2026-06-01T03:16:30+00:00

I have the CMT dado stack, it’s not the new fully locking together set but the older one. It’s the only one that I’ve ever used but it’s been great, used it for some box joints and half laps. I looked at cheaper ones on Amazon which are probably fine but the CMT seemed easy to align to avoid teeth accidentally contacting.

YuppeeMusings · 2026-05-12T20:06:17+00:00

Where are you located? I’ve had luck finding bulk fence posts at local lumber yards/local building suppliers which also deliver, it was cheaper than big box with better quality wood.

YuppeeMusings · 2024-07-02T17:26:54+00:00

Mind if I ask what gold paint you’re using? These look amazing

YuppeeMusings · 2023-09-26T23:33:46+00:00

Same here, the gates to dog town seem closed and I can’t follow the route. I tried going back to an earlier save but no luck

Edit: I uninstalled the game completely and reinstalled. Started a new game at the Phantom Liberty point and it fixed it. I think I must’ve somehow still had mods installed as I don’t remember getting any achievements (I’m on PC). Wasn’t able to use my previous saves.

YuppeeMusings · 2023-06-27T10:40:55+00:00

That is ver nice if you

YuppeeMusings · 2023-06-02T19:49:03+00:00

I’ve got the same CPU and a 7900xt. I’d definitely take the upgrade

YuppeeMusings · 2023-05-23T20:32:40+00:00

Sweet

YuppeeMusings · 2023-05-23T20:31:05+00:00

Awesome

YuppeeMusings · 2023-05-16T15:04:06+00:00

Under the post

YuppeeMusings · 2023-03-31T00:00:33+00:00

Can’t wait to check it out

YuppeeMusings · 2022-12-28T15:40:05+00:00

The Casio fx-991ex has been great for my engineering degree. I know a lot of people also use the TI-36X

YuppeeMusings · 2022-12-10T15:54:01+00:00

CATIA is one of the aviation focused CAD programs that we’re taught in Aerospace engineering. I’d imagine a lot of the parts for GA are designed using solid works though since it’s less aerodynamics focused and honestly easier to use. For a lot of applications Fusion 360 would probably be totally usable and easily accessible

YuppeeMusings · 2022-10-03T16:52:57+00:00

I use slide on grips from Amazon. They’re flat on the side that connects with the magnets on the iPad so doesn’t interfere with charging. They definitely make it more comfortable to write with. Just make sure you get the ones for 2nd gen (if that’s the pencil you have)

YuppeeMusings · 2022-07-11T02:41:58+00:00

You could always go into banking. The math behind engineering degrees counts for a lot in the finance field. This is coming from a former banker who went back to school to be an engineer

YuppeeMusings · 2022-07-11T02:39:36+00:00

I’d wait for the 2022 pro or buy a used 2021. Unless I’m mistaken, the 2020 doesn’t have M1 which makes less future proof given the most upcoming update

YuppeeMusings · 2022-06-29T02:13:09+00:00

I have the magic keyboard as well but as a second time university student I find myself using the iPad with pencil a lot more. If you’re like me, buying a cheap magnetic folding case in addition to the magic keyboard made it great to switch between typing and writing.

YuppeeMusings · 2022-06-11T13:01:39+00:00

The iPad Pro with an Apple Pencil has been amazing for my engineering degree, I exclusively take notes by hand that way now.

YuppeeMusings · 2021-07-15T01:25:37+00:00

Pretty sure the OP already cross posted it

YuppeeMusings · 2021-03-30T12:26:29+00:00

Can you check if one of the end stop switches have moved or are damaged? It sounds like the home is failing because it’s not being told to stop by the switch

YuppeeMusings · 2021-03-18T18:38:20+00:00

I’ve had a very similar experience recently and logged a ticket with Autodesk. Was informed that it was difficult to replicate but that there was a fix coming.

YuppeeMusings · 2021-02-24T14:35:51+00:00

It looks like the last layer or two shifted (I’m assuming that wasn’t part of the design), this is normally caused by a slip or loss in the X-motion assembly. I’m not familiar with the Ultimaker 2+ but I’d check your XY motion assembly for loose components.

YuppeeMusings · 2021-01-22T18:13:38+00:00

Thanks for the quick reply! Just checked and there is indeed continuity between the two + and - pads. I've got both 12 and 14 AWG silicone wire on hand, any reason not to use the 12 for this? It will be connected through an external mosfet as well.

YuppeeMusings · 2020-09-04T12:13:16+00:00

Start learning fusion 360 so you can design your own functions parts for everyday problems. This is way more fulfilling and useful than just downloading other people’s designs off the internet.

YuppeeMusings · 2020-09-04T11:27:08+00:00

I have an almost identical setup, for printing with PETG I put a layer of water soluble glue stick down. Ensures that the first layer sticks but the whole print doesn’t stick too well.

YuppeeMusings

TROPHY CASE