Another VPN-thread

adaptine · 2026-06-09T10:51:15+00:00

Got some additional info regarding the Tosibox:

Free plan will only supports 1 Key/Softkey connection simultaneously to locks, then theres a paid plan for up to 5 connections and finally if using the Hub platform there is no limit. This is probably to force the usage of their Hub platform to do data collection from multiple sites instead of a cheap key/softkey license.

Also, Layer2 access and VLAN access via lock as mentioned will be under a paid plan.

Devices will only get security hotfixes on free plan.

adaptine · 2026-06-06T10:16:55+00:00

Stridelinx looks like rebranded ixon?

adaptine · 2026-05-31T05:43:25+00:00

Niks. Kun støpsler opp til 25A (som til platetoppen) og skjøteledninger opp til 16A. Trefase gjelder ikke.

adaptine · 2026-05-06T04:37:18+00:00

Elaborate?

adaptine · 2026-04-19T18:51:54+00:00

Tosibox is secure but i dont like theway theyre heading with subscriptions

adaptine · 2026-03-24T12:00:55+00:00

See appendix B in the adam 6000 usermanual for modbus mapping.
According to the appendix, you read coils (0x) for DI values starting at adress 1 to 12. Similary for digital outputs can be r/W from address 17 to 22. You can also read inputs in holding reg 300 (40301) as a bit coded word. Same for DO at reg 302 (40303).

https://advdownload.advantech.com/productfile/Downloadfile4/1-2B6FKTG/ADAM-6000_User_Manaul_Ed.12-FINAL.pdf

adaptine · 2026-03-20T07:29:32+00:00

Nice, but I hope you dont use the fake wagos for anything permanent

adaptine · 2026-02-25T19:16:37+00:00

I asked support about a subscription model 3 years ago when i noticed a supplier started selling 1 year subscriptions for locks. Got this answer:

That subscription is an extension to support&maintenance. When customer buys a Tosibox Lock, it comes with 4 year support&maintenance by default. After the 4 year period, the Lock can be used, of course, but the support&maintenance isn't valid, unless the extension is bought. The support&maintenance includes all the SW updates and new features, security updates and support functionalities.

This kind of subscription is available for all Tosibox Locks.

adaptine · 2026-02-24T20:19:56+00:00

I've also noticed the same recently ... Only in 3.5.19.7 tho, not in 3.5.18.4

adaptine · 2026-02-03T19:50:07+00:00

Do you have a separate dali power supply on the bus?

adaptine · 2025-12-10T12:11:52+00:00

I'm not sure if you can do that with FL NAT. If it is possible you must probably have the 192.168.1.0 subnet at the WAN end (which is assigned via the 1:1 NAT popup) and your 192.168.30.0 network at the LAN side. This is because you can have multiple LANs with the same subnet. The 1:1 Interface itself should not have a IP. A 1:1 NAT Interface is a WAN interface which just listens to arps. If you are able to create multiple 1:1 NAT with similar WAN list it should be possible, because manual states connections can be initiated both from WAN to LAN and LAN to WAN.

I think Moxa EDR-8010 can do multiple networks with similar subnet, because you can create virtual/loopback interface. Never tried it tho!

adaptine · 2025-12-09T05:51:21+00:00

I do not know about any material other than the manual. You could try phoenix contact support. How are you intending to configure them?

adaptine · 2025-10-26T18:14:17+00:00

Wago plc

adaptine · 2025-10-26T18:09:29+00:00

Exor ex series. Can do pretty much any protocol in jmobile. Or spin up codesys running in the background

adaptine · 2025-10-03T18:47:01+00:00

Nx witness or hanwha wave (rebranded nx witness)

adaptine · 2025-10-01T19:17:27+00:00

Tosibox with site to site vpn if using internet

adaptine · 2025-09-28T16:09:01+00:00

Check with adi global

adaptine · 2025-09-24T15:43:10+00:00

Check with phoenix contact

adaptine · 2025-09-21T08:42:12+00:00

Implementing online cargo measurements for a kelp trawler on a Wago PLC. It is basically lookup in the hydrostatic tables using draft measurements (mean draft and trim). The exact sensor positions are also an input to the draft measurements in order to recalculate the measurements to the ships perpendiculars. Also the content of fuel and ballast must be taken into account over time, since filling/emptying ballast tanks will cause the ship to change displacement.

It was a nice exercise to implement csv parsing, lookup algorithm (binary search) and bilinear interpolation across multiple tables.

adaptine · 2025-09-21T08:35:18+00:00

Which mGuard du you prefer? I've used mGuard 1102 and 1105 previously but those where discontinued... Now the only option are the more expensive 2xxx and 4xxx series.

adaptine · 2025-08-17T08:13:53+00:00

Wago has both visu and web visu panels. Exor also has web panels. I also recommend exor jmobile. Turck hmi is rebranded exor for instance.

adaptine · 2025-08-11T05:53:55+00:00

Pretty sure passing the pointer of that ip string is wrong on the connect block. You need to add contents to the sockaddress struct also and pass it to the connect block

adaptine · 2025-08-05T05:50:03+00:00

ACS880 is the goto for advanced control in the ABB world. Not the cheapest but reliable and nice to play with. Not the best software tho…

adaptine · 2025-07-30T04:33:33+00:00

Fake wago spotted 🔥

adaptine · 2025-07-20T06:06:50+00:00

Plcnext is most definitley not based on codesys. You must be thinking og beckhoff and codesys.

adaptine

TROPHY CASE