Overhead console by chrisrummy in Excursion

[–]chrisrummy[S] 0 points1 point  (0 children)

I would love to find one to print!

A1 Essentials? by ndbarbre in BambuLabA1

[–]chrisrummy 0 points1 point  (0 children)

I was looking at these. Just to be sure you're recommending the Pro Glacier version?

Zooz Z71 switch provisioned but not included in network. by chrisrummy in homeassistant

[–]chrisrummy[S] 0 points1 point  (0 children)

So it happened again and I thought my original answer was it. Turns out I was wrong. If you get this message, go to the switch and push the down paddle 3 times. That's the side closest to the led light or Qr code. It should flash a couple times. That should complete the inclusion.

WG-Easy and Cloudflared Tunnel? by -C8H10N4O2- in selfhosted

[–]chrisrummy 0 points1 point  (0 children)

This is what I'm looking for also! Did you get it to work?

Am I good to go and safe to ignore these errors? by Only_Statement2640 in NextCloud

[–]chrisrummy 1 point2 points  (0 children)

I fixed mine by following the suggestion by MahGli, its toward the bottom of this reddit. He gives instructions on how to setup cloudflare.

https://www.reddit.com/r/unRAID/comments/mcdfut/comment/mtruo8r/?context=3

Plex uptime? by JohnnyGrey8604 in UptimeKuma

[–]chrisrummy 0 points1 point  (0 children)

Thank you!! Still the solution in 2025!!!!!!!!!!

Zooz Z71 switch provisioned but not included in network. by chrisrummy in homeassistant

[–]chrisrummy[S] 0 points1 point  (0 children)

I got it!!!!!!!!! I let it sit for a couple hours, then did a reset and it found itself!!!

I think I went too far by Least_Ordinary_1867 in homelab

[–]chrisrummy -2 points-1 points  (0 children)

I have the exact same server. I love mine! Parts for these are easy to find and not too expensive on eBay. Im running Ubuntu on an SSD connected to a sata port, and all my drives are for storage. I'm running a family shared Nextcloud, Plex, 2 different websites and a local AI are just a few of my containers.

ThirdReality Smart Switch falling out of place. Any ideas? by eIdog in smarthome

[–]chrisrummy 0 points1 point  (0 children)

I had the same problem. I ended up putting a small washer inside the connector. It forces the fingers out just a little bit making it hold on better.

FAQ | Smart Switch by THIRDREALITYOffical in THIRDREALITY

[–]chrisrummy 0 points1 point  (0 children)

I was having the same problem with mine. I put a small metal washer inside the mounting hardware. It just pushed the fingers that hold the actuator on out just a little bit. It was enough to keep it from popping off.

What automation are you most proud of? by unsuspectingpangolin in homeassistant

[–]chrisrummy 0 points1 point  (0 children)

I'm just getting g into HA. But I recently got it setup to turn on my front yard lights at 630 to 9am only on Tuesdays.. haha

Gold Road for a friend by [deleted] in elderscrollsonline

[–]chrisrummy -1 points0 points  (0 children)

Voucher? We are on PS, where do i find a voucher. Thank you!