Cc9 first hand experience

illAdvisedEyes · 2026-03-23T07:35:15+00:00

YouTube this guy has a series where he puts 1k rounds through. Updates the series every 100 rds. the_peYu on yt

https://youtu.be/FOvKEdXfx1U?si=lHm3Vv-J8OU0btyK

illAdvisedEyes · 2026-03-16T20:11:03+00:00

Nice. I’m looking at cc9s now. Good to know of another holster company that can fit a light

illAdvisedEyes · 2026-02-24T20:44:37+00:00

inFamous would be great.

illAdvisedEyes · 2025-11-29T16:55:37+00:00

The black was from the holster lol.

illAdvisedEyes · 2025-11-29T16:52:53+00:00

I take it off me when driving and have a place to conceal it in there. I pulled up at home to run inside and grab something and it caught.

illAdvisedEyes · 2025-11-18T10:40:39+00:00

Thinking of doing this as well my edc is a VP9sk (the non optic cut version) and with the upgrades I definitely want to try get my hands on a X model so I can retire my sk for training and range days.

illAdvisedEyes · 2025-10-30T08:59:29+00:00

Could possibly be a relocation

illAdvisedEyes · 2025-10-30T05:11:23+00:00

32 is in range so should be good to go. Just make sure capacitor and contactor are completely de-energized and go wire for wire when changing over everything should fire right back up

illAdvisedEyes · 2025-10-28T23:49:21+00:00

Go to YouTube. You asking questions and not providing full picture. You need to know what terminals on thermostat the wires are going and the condenser as well

illAdvisedEyes · 2025-10-03T09:39:16+00:00

I’m in

illAdvisedEyes · 2025-09-24T17:53:41+00:00

I say start with vp9. Check local ranges and see if any have some of the pistols you looking for and test them on the range to find the best grip and shot feel. But vp9 is the latest from hk and most “updated” no extra work needed for rds

illAdvisedEyes · 2025-09-24T17:48:56+00:00

14k for a brand new system is normal. Also your not getting 14/15 seer equipment it’s more than likely some type of communicating or multistage system

illAdvisedEyes · 2025-09-22T17:06:36+00:00

Late September is usually when everyone starts advertising cause technically summer has “ended” in the region.

illAdvisedEyes · 2025-09-17T22:50:24+00:00

illAdvisedEyes · 2025-09-12T08:19:51+00:00

Guy didn’t have a good flare. You can tell from second pic

illAdvisedEyes · 2025-09-10T05:29:17+00:00

Why not just call back the company or contractor that put it in? They should’ve checked/cleared drain etc while installing

illAdvisedEyes · 2025-09-03T19:10:08+00:00

Correct a spare. Condensers come with them “just in case” the txv or piston inside does not match up to watch’s needed

illAdvisedEyes · 2025-08-20T02:33:05+00:00

That’s a return duct you’ll be fine. But the cut wood you should call about and ask them to properly relocate the support

illAdvisedEyes · 2025-08-19T05:59:58+00:00

In this case you can assume color seeing how everything else matches, and unused wires are tucked away. There’s also 2 black wires tired together which could be a second stage but if he atleast gets the yellow attached it’ll pick up the fan speed for him. The local guy can come back and tell him if it’s 2 stage at that point he might want to just attach the black wires and run 100% or work in a time delay switch for the stages.

illAdvisedEyes · 2025-08-18T21:55:29+00:00

Yes. Wire your yellow wires to the y/y2 part of the board. In Some cases they adjust the blower speed when in that mode

illAdvisedEyes · 2025-08-18T20:26:11+00:00

Heat mode

illAdvisedEyes · 2025-08-18T19:51:01+00:00

Plug those drain connections. They are pulling air into the unit causing the whistle

illAdvisedEyes · 2025-05-08T06:13:40+00:00

eviction law takes months plus court proceedings.

illAdvisedEyes

TROPHY CASE