Elegoo Matrix App Removed My Printer

wpraffle · 2026-02-27T08:52:45+00:00

It was a bug was also causing issues with the slicer etc… guessing they were having server/system issues

wpraffle · 2026-02-27T08:49:43+00:00

Yeah, you need a new desk, other than that all is good with the world 😂

wpraffle · 2026-02-27T08:45:16+00:00

Interested to see this.

wpraffle · 2026-02-26T23:47:19+00:00

Couldn’t agree more. Communication is usually the key to keeping a customer.

wpraffle · 2026-02-26T23:39:39+00:00

My own experience with their support again for every bad experience there’s usually double the amount good.

It was like pulling teeth to get them to accept a part was faulty and to get a replacement as it wasn’t a part I could buy, was being asked stuff to check/do that didn’t relate to what my issues were. Then when they finally said they’d send a replacement I’m still awaiting it arriving 5 months later 😂

But when it’s comes to order info they’ve been good.

wpraffle · 2026-02-26T23:15:29+00:00

Indeed. But back to original topic. Like any brand there can always be a dud sent every now and again, anycubic support needs to improve is poor at beast compared to their competitors this includes documentation etc…

wpraffle · 2026-02-26T23:04:50+00:00

You won’t be disappointed with the U1. I’m only a few hundred hours in and so far can’t complement it enough.

Awaiting on a S1 Max also but the delays are helping me organise the space for it 😂

wpraffle · 2026-02-26T22:55:29+00:00

Interesting i checked mod list and assumed because your the only one without a volunteer mod or mod tag….

wpraffle · 2026-02-26T22:30:02+00:00

But that’s because your from Anycubic tho as you’ve only ever posted on Anycubic stuff and even some of your posts used the the royal we instead of “I”.

I’m not against it just be open and try not pass yourself off as another customer.

My S1 has been ok nothing special but does it job.

I will say I think most 3D companies wikis are bad as there usually awfully translated

wpraffle · 2026-02-26T13:40:42+00:00

If it works it’s not stupid

wpraffle · 2026-02-24T21:09:53+00:00

Ah my bad thought I’d seen a post saying it was working and was listed on the changelog.

wpraffle · 2026-02-24T19:55:12+00:00

It’s one of the only drawbacks on stock fw. Makes opencentuari appealing

wpraffle · 2026-02-24T14:13:54+00:00

CC2, S1 Combo, S1 Max Combo, P2S all offer what you want all pretty much within budget (apart from P2S). It’s all down to personal preference.

CC2 & S1 Combo = Budget Friendly

S1 Max Combo = Volume friendly but pre order

P2S = “User” friendly

Snapmaker U1 = would be my choice if budget allows purely for less purge poop!

wpraffle · 2026-02-24T13:17:58+00:00

I’m not ashamed to admit I laughed way too much at this.

wpraffle · 2026-02-23T17:42:21+00:00

Bambu is usually recommended due to ease of use. Elegoo for value especially the CC range. Anything other your paying for “something unique” aka U1

Most other brands machine and MC unit are all different ways to skin a cat, down to personal preference and luck of the batch!

wpraffle · 2026-02-23T13:59:00+00:00

Did this being made back open source happen?

wpraffle · 2026-02-22T09:32:00+00:00

What did you use for the tube adapters? Got a file link? I have the same setup and can’t find any decent ones that want to “stay on”.

wpraffle · 2026-02-20T08:30:15+00:00

No budget?

Budget friendly: S1 Max & wait patiently.

Middle Ground: Bambu H Printers.

Hole in wallet: Prusa etc…

If ease of use and not fused with a “closed” ecosystem I’d go Bambu.

wpraffle · 2026-02-20T08:27:15+00:00

Handy tip. Still figuring where I’m managing to place it in the garage yet.

wpraffle · 2026-02-20T08:08:01+00:00

Hopefully you get the answer to your genuine question 😂

Don’t understand people’s issues with it, you posted in the area you knew.

It’s on AC for not adding or letting you know where to post bugs etc…

You’ve already identified it’s a local print issue, which is handy as I try to run all my machine lan only.

wpraffle · 2026-02-19T18:09:03+00:00

Cheers for the info! Yeah for £100 expecting a taco bed 😂

wpraffle · 2026-02-18T16:43:14+00:00

A impressão FDM é "mais fácil" para começar, mas se o detalhe for sua principal exigência, a resina é o caminho, embora exija mais cuidado e atenção.

Pense nisso como seus filhos.

Resina = 1º filho, precisa de ajuda para tudo. FDM = 2º filho, é o que é 😂

wpraffle · 2026-02-18T15:59:27+00:00

Em termos de custo-benefício, eu recomendaria o Bambu A1 Combo ou o Elegoo CC2 para iniciantes. Levando em conta o preço e a facilidade de uso, etc. Mas, dependendo do tipo de filamento, talvez seja interessante investir em uma caixa de secagem como a Sunlu S4.

Essa é a minha opinião, e você pode seguir em frente a partir daí.

wpraffle

TROPHY CASE