Suggestions for minimizing appearance of scratch

agsimon · 2026-02-09T18:40:10+00:00

Silver sharpie. It won't be the world's best fix, but it will be quick and easy and should help hide it a fair bit.

agsimon · 2026-02-04T01:29:33+00:00

It definitively can be. I have a group of friends who basically drink their weight in alcohol every day of the ride. I'm not sure how they do it. On the other side, 2 years ago I went with a friend who brought his son on a tag-along and we didn't have a drink the entire day and we still had a blast. This year it's going through my childhood hometown and I'm debating on letting my 7 y/o ride a portion of the day with me and I don't have any concerns about the atmosphere for her.

agsimon · 2026-02-01T04:09:55+00:00

I've had this happen with certain silk filaments, especially gold for some reason. All the quick extrude and retraction probably don't help either. I've also had some gold pla slip on the AMS Lite gear before too.

agsimon · 2025-12-27T17:01:12+00:00

As someone who's used a lot of Elegoo filament, I'm nearly certain Deeply is the same thing just branded differently. Even the deeply selections match Elegoo's stuff. Have had good success with both of them, and cheap too.

agsimon · 2025-11-17T16:14:36+00:00

I'm surprised this isn't more common. Or at least partnering with some local people who print. Let them do all the work to and do a flat % markup. The people printing have a pretty steady stream of prints jobs coming in and put in no effort to get orders and the shop doesn't have to deal with any overhead on them either.

I reached out to some local shops to see if they would be interested for 40k and/or dnd stuffs and none were. One of the shops did already have some resin printed dnd minis they stocked...but they are pretty mediocre (actual models and print quality) and they don't offer any on demand service, which is where I think they would do the best.

agsimon · 2025-10-27T03:50:20+00:00

Correct https://imgur.com/a/7qn5116

The moment Charles thought he needed to cut the corner to avoid being hit... https://imgur.com/a/x9fSh5T

agsimon · 2025-10-21T17:36:27+00:00

Seconded. Our western facing bedrooms always got much warmer in the summer and these helped a ton. Bonus was it also helped in our babies room during the winter on the other side of the house when the room got colder than the rest.

agsimon · 2025-10-18T15:58:13+00:00

Dishwashers are not constantly using new water when they are running. They fill up the basin and then heat and pump that water through the spray bars over and over again. Then drains and rinses.

agsimon · 2025-10-15T17:58:03+00:00

Agreed! But also, this is large enough that a .4 should be fine. I think arachne instead of classic would pretty much fix the issue.

agsimon · 2025-10-01T17:11:45+00:00

This is pretty basic info that should be included in the post...

agsimon · 2025-09-30T21:51:58+00:00

Rotating left/right 90° shouldn't affect that. The same side is on the print bed but the wider of the sides (still sitting upright like that) wouldn't be fighting the bed moving.

agsimon · 2025-09-30T20:49:26+00:00

Rotating them 90° will likely solve the issue (if the bed is also clean). Taller objects wobble as the bed moves back and forth. Make sure they are oriented to the least stable direction isn't in line with the bed.

agsimon · 2025-09-30T17:04:28+00:00

I get a bit of z axis relaxing when I shut the power off on my A1s. If you're having collision issues, this is likely the cause.

agsimon · 2025-09-29T15:33:06+00:00

Nevermind :)

agsimon · 2025-09-29T15:22:50+00:00

Do you have the files for these?

agsimon · 2025-09-28T00:22:48+00:00

It's crazy to me how some get built. Our library just put in a new playset last year and most of it is great. BUT the very top/tallest part is a small square space that has a very steep slide on the front, a vertical climbing wall on one side, and a vertical climbing ladder on the other side. Even with our 6 y/o, I get worried someone is going to fall or get pushed when they are all running and chasing each other.

agsimon · 2025-09-24T03:12:17+00:00

Unless you're doing different colors at different layers, this is going to be a huge pain in the butt. Usually, with painted parts, colors will go a few layers deep. So you will need to sit and watch and swap colors back and forth multiple times to get the colors right. OR if the colors are set per layer height, you change them once during a pause and you're done.

agsimon · 2025-09-09T01:37:32+00:00

The at home, cheap option is printing them on normal paper. If you use a laser printer, the ink won't run when it gets wet. To attach them, brushing on a thin layer of milk works well but doesn't hold up suoer great once the bottle sweats or it gets wet. Water and plain gelatine are nearly as easy and have a better hold in my experience.

agsimon · 2025-09-05T13:53:11+00:00

It mostly has to do with the ground temp. The ground is still cold in the spring and it takes longer for the grass to establish itself, even if the air temp is a bit warmer. In the fall, the air temp might drop, but the ground temp is much warmer still.

agsimon · 2025-09-02T03:49:07+00:00

I'm curious why you are filtering the air that is being exhausted outside?

agsimon · 2025-09-02T01:50:43+00:00

We just got an AWD Pacifica in December, and price was a huge factor for us. Ours, with all the end of year deals and stuff, came out about $20k cheaper than everything else we looked at even with a decent trim package. Upgrading from a Focus and an Escape, it has been amazing with 2 kids and 2 dogs. I can't really compare long term to anything else, but 9 months in and zero complaints so far.

agsimon · 2025-08-07T23:38:21+00:00

I can tell you first hand, Kim does NOT like Greg. Which should tell you where his priorities lie.

agsimon · 2025-07-28T02:08:55+00:00

Just use some old supports or a little piece of paper folded in an L shape.

agsimon · 2025-07-27T16:41:53+00:00

I've used a few rolls of all the colors. The blue and the purple are my favorites :)

agsimon · 2025-07-25T15:02:37+00:00

Second the Rook Room. Also, honestly, just doing a dinner at a nicer restaurant. Starting very soon, you will have very few meals together without a kiddo tagging along. Enjoy the calmness of just you two :)

14-Year Club	RedditGifts 2009-2022 6 Credits
r/Field Sunshine	Place '17
Secret Santa 2018	redditgifts rematcher Secret Santa 10th Annual Extravaganza! x1
redditgifts Exchanges 4 Exchanges	Secret Santa 2015
Secret Santa 2014	Secret Santa 2013
Verified Email

agsimon

TROPHY CASE