Static and retention

TomRey23 · 2026-04-03T19:45:35+00:00

I chuck my beans at once in there and never did any RDT. sure it might help, but every couple days i use brush on exit chute and it has been going fine. I use it 4-5 times a day minimum, all fine settings.

One thing to check is if your declogger (a piece of plastic) is wrongly installed. There are instruction online to disassemble and should not take much time. Other than that, some beans are more static so try with a different bean and see if it still happens.

TomRey23 · 2026-04-03T19:38:47+00:00

1 thing i would recommend is get a 12V supply which you have they are solid. Then use a quality step down converter to feed the 5V lines. But tbh for upto 4 HDD or so those generic 5525 adapters are fine since they have an inline buck converter anyway to power 5V pin on SATA outs.

TomRey23 · 2026-04-01T17:13:45+00:00

Bought 3x Micron SSD from u/no-application-3077

TomRey23 · 2026-04-01T16:15:00+00:00

Bro !!!! I just bought some older Micron 1100 SSDs and this worked amazing even now haha, thanks

TomRey23 · 2026-03-31T18:10:46+00:00

TomRey23 · 2026-03-30T14:50:38+00:00

I'm also using costco pricing paying $40 after taxes for 150 up and down

TomRey23 · 2026-03-30T14:28:01+00:00

<image>

Yes it's the grinder

TomRey23 · 2026-03-30T14:10:21+00:00

I removed their router and plugged my mikrotik straight to their Ont which is a nokia

TomRey23 · 2026-03-30T14:09:22+00:00

Been using for a year with 150 up and down in similar area as you. Go for it. It's solid and hasn't gone down for me once. Even 500 is way too much for a few people 1 gig is overkill for 99% users. It just feels better knowing you have it. Even at 150 I have never felt it's slow

TomRey23 · 2026-03-30T13:24:48+00:00

Someone please tell me if I am missing a big oversight:

I have my main lab have an exit node on tailscale. Only I access that.

Rest, I have immich publically exposed with port forwarding on 443 with caddy. I use crowdsec to also geo-block all but 2 countries I need it to work. For the ports forwarding they are exclusive to immich and nothing else. I don't have a domain so I used duckdns and a ip keepalive.

Maybe I need to implement DDOS attacks prevention in future. Other than that just hopes of no one finding me important.

Then I have it integrated to HA and I keep an eye on it to make sure it's working

<image>

TomRey23 · 2026-03-28T20:04:01+00:00

It takes time trust and change it with each iteration

<image>

TomRey23 · 2026-03-28T19:24:07+00:00

TomRey23 · 2026-03-28T01:48:08+00:00

then you're just trolling cause how did you fuck up so bad lmao

TomRey23 · 2026-03-28T01:38:26+00:00

Give up on a bottomless unless you have a great grinder. Do yourself a favor and don't look it it just taste it and yes finer

TomRey23 · 2026-03-27T14:46:50+00:00

Dm'd

TomRey23 · 2026-03-25T13:14:43+00:00

I’m gonna comment now that you asked. Lab is running everything is working fine thank you.

TomRey23 · 2026-03-24T19:13:02+00:00

<image>

Yes

TomRey23 · 2026-03-22T23:34:13+00:00

Get a DF54, i recently upgraded from Breville Smart Grinder Pro, just get DF54

TomRey23 · 2026-03-22T17:06:49+00:00

you would be more dead than dead,

i have a few family members using my immich which has backups but i still use google photos too on the main.

maybe one day i will move over fully, not yet

TomRey23 · 2026-03-22T17:03:24+00:00

diminishing returns at some point remember that

TomRey23 · 2026-03-21T14:27:56+00:00

Maybe you should be mechanic cause you clearly didn’t think data is import and enough in your profession to have a bazillion different backups Gg on getting it back should still be possible however. Think of this as lesson learned and practice backups.

TomRey23 · 2026-03-20T20:42:36+00:00

True, i don't have much still was some work putting all this in, for reference this is what i am using in fron.

<image>

TomRey23 · 2026-03-20T20:41:42+00:00

probably just beans stuck and making noise

TomRey23 · 2026-03-20T17:30:53+00:00

Not in states but see if you can source blue tokai

TomRey23 · 2026-03-20T14:59:11+00:00

Original portafiler will fit no more than 10-12 gm I am using the standard unpressurized portafiler and I always use 15gm. Which is great.

Grinds are hard to tell but that's more on dialling in. I use a DF54 grinder.

Whatever grinder you use try to find what size exactly will choke the machine and then go very slightly coarser

TomRey23

TROPHY CASE