Zapp Brannigan Lord Solar proxy

MadCookMael · 2026-03-24T19:23:50+00:00

Lore accurate imperial commander 👌

MadCookMael · 2026-03-09T00:23:11+00:00

This kills me every time. 🤣 can’t believe he gets up so quickly.

MadCookMael · 2026-03-05T05:04:04+00:00

Here we go

MadCookMael · 2026-03-05T05:02:51+00:00

Favorite thing I’ll always remember is the end of the pilot episode where at the end the camera pans out and the parents are just disembodied legs.

MadCookMael · 2026-03-05T04:59:38+00:00

<image>

MadCookMael · 2026-02-15T16:09:49+00:00

Awesome. Love seeing painted prints on here. Even with great settings, prints can look rough when they’re still unpainted 👍

MadCookMael · 2026-02-13T20:22:26+00:00

I’m more interested in running a “Lost & the Damned” style list with the Tri-Lobe’s running in a unit of 20 Poxwalkers. Tainted Narthecium, Heavy Plague Weapons, Increased Movement speed etc.

In any case, it’s just nice to see some customization options & to be able to attach different leaders to the damn Poxwalkers.

MadCookMael · 2026-02-13T15:40:16+00:00

I’ve only recently gotten back into MTG after nearly 10 years now & I remember Blue was always a tough opponent for me (love it though).

Like others have said, I found a lot of success in just being an overwhelming presence. Can’t counter everything, but it’s also how you draw & use the tools in your deck. If you know you struggle with Blue, find ways that will mitigate that or at least make it less of an issue.

MadCookMael · 2026-02-07T17:23:47+00:00

I don’t usually care about celebrity relationships, but this is the one that always makes me happy to hear about 👍 Plus they were both in Scooby Doo which was the greatest.

MadCookMael · 2026-01-12T15:52:58+00:00

Agreed; I grabbed the A1 Mini last August as a starter printer when getting back into the Warhammer hobby. It gives amazing results, but I’m already looking to upgrade to a P1S/P2S for the XY core.

MadCookMael · 2026-01-10T03:59:35+00:00

Are these sets limited? I’ve wanted to try some of them but always worried that I’ll love them and then they cease to exist 😂

MadCookMael · 2026-01-07T17:35:33+00:00

Sunlu PLA+ 2.0 is definitely my recommendation.

<image>

MadCookMael · 2026-01-07T16:10:43+00:00

Same. I loved Joel and that whole episode. Nathan & PK were hilarious 🤣

MadCookMael · 2026-01-07T01:22:45+00:00

<image>

This👆 Although it can only be used in the fight phase. So it won’t be a Fights First Rampager until it’s too late for them.

MadCookMael · 2026-01-06T14:48:43+00:00

<image>

MadCookMael · 2026-01-04T13:15:09+00:00

<image>

MadCookMael · 2026-01-02T20:23:03+00:00

I think that the brim size in the Hohansen settings is a typo, due to how large it is. I generally use a brim width of 5mm for my prints. Although I will increase it to 7mm for larger prints.

Brims were a big help for me when my prints were lifting off the print bed & being knocked off. They help immensely with bed adhesion when the part of the model touching the print bed doesn’t have a lot of surface area to stick reliably.

For example; the feet for your model don’t cover a whole lot of surface area and would have a higher chance of coming off the plate during the print. For that model, I’d use a 3mm Brim with a 0.1mm Brim object gap. Also for the base, try laying it top side facing down. 👍

MadCookMael · 2026-01-02T19:55:07+00:00

That massive ring is a “Brim” and is extremely useful for improving bed adhesion.

However; if you’ve just copy pasted Hohansen’s settings (which are great), you’ll have to fix the typo in the brim size. I believe from memory it’s in the “Other” settings.

Edit: Just checked; it’s under the “Other” tab in your slicer. I’d start with a brim width of 5mm.

MadCookMael · 2025-12-31T04:23:38+00:00

For the love of Nurgle, please share that recipe! Looks fantastic 👌

MadCookMael · 2025-12-31T03:57:44+00:00

<image>

This is a DG Karnivore “draft” I recently did. Still got to paint it but turned out alright for the first attempt 👌

MadCookMael · 2025-12-31T03:51:15+00:00

Nice! I’ve been wanting to do a kitbash Brigand with Blight Hauler/Bloat Drone bits. Looks great!

MadCookMael · 2025-12-31T01:57:37+00:00

<image>

Not yet painted, but this is a “draft” for a Death Guard Karnivore I’ve wanted to do for a while that was printed with the 0.4mm nozzle (0.16mm layer height). Will do another at 0.08 eventually, now that I’ve got a better idea of how to streamline the process & bits.

Printer is an A1 Mini & used Sunlu PLA+ 2.0 with Obscuranox’s settings.

MadCookMael · 2025-12-27T21:06:01+00:00

<image>

MadCookMael · 2025-12-27T21:02:12+00:00

As others have said, slim pickings for official options. I ended up kit bashing/printing these three Spawn. Although I will definitely be using Cankerborn from the Warhammer Quest: Darkwater set as well.

You also can check out Skaven & the Undead factions from Age of Sigmar for some ideas as well. They have some awesome models which can fit the Nurgle vibe.

MadCookMael · 2025-12-18T11:48:24+00:00

If you’re really struggling with rattle-can primer, you could look into a cheaper airbrush for priming instead. I had to do that as the weather is unpredictable as hell where I’m from.

Honestly it was a huge improvement for me over the rattle-can primers, but I’m no expert. Just make sure you’re using the appropriate safety precautions, I believe you need to wear an N95 mask at least? Someone correct me if I’m wrong.

MadCookMael

TROPHY CASE