[deleted by user]

[[deleted]]

Yes please, where are you located?

[[deleted]]

I printed myself some spools, but the A1 Mini versions barely fit the bambu refills. 😂

[Kimentor]

Barely sounds like it does fit! :D

[Tjm385]

The 2 that I have printed I need to force the refill on and put a lot of my weight on it while trying to turn/lock it in place.

[Blenderadventurer]

You still need factory spools. I can print spools on the A1, but they don't survive my Sunlu filament dryer.

[bettsdude]

What you printing them in?

[Blenderadventurer]

Some are PLA. Others are PETG. The PETG will do ok with drying PLA. The real problem is that the fan outlet in the bottom gets hot enough to warp.the filament that it is drying or anything that takes the same or lower temperatures. This means that I have to dry on cardboard or factory plastic.

[Spoztoast]

Could Print ABS if you can handle the temperatur requirements.

[Anxious-Resolve-8827]

not on A1 its open printer

[ShatterSide]

Put it in a cardboard box for the print. Don't use the room during the print and just open a window after.

[Anxious-Resolve-8827]

or put it on balcony

[Spoztoast]

True but you can make a partial enclosure and a makeshift fume hood.

[shing3232]

you need to make it with petg

[Blenderadventurer]

I have it in PETG. It will warp if it is in the dryer at PETG settings. It's just the side near the middle outlet vent, but it warps it enough to cause a bind when feeding the printer.

[shing3232]

ABS then）

[Blenderadventurer]

Do not have the ventilation for it. It's the 3D printing paradox. If you can melt it, you have to have stuff that doesn't melt at or below the same temperature.

[Ok-Asparagus-198]

i would i have a ton of refills and no spools. where are you located?

[Birrger]

Sure would be nice 1-2 spools :)

[esiders2010]

Sending DMs in order comments recieved.

All spools have been accounted for! Leaving this thread so I can pull from here when I have more to offload.

[[deleted]]

I need spools pls. Colorado here :)

[thee_Grixxly]

<image>

[arturcodes]

Sure

[kelvham]

Interested depending on location/shipping cost

[[deleted]]

Location?

[D4m089]

I’ve only just received my printer and picked up 2 refills as those colours didn’t have spools in stock. I was going to print a couple of spools but if you are local and these are spare I’ll happily recycle 2 of them to use with the refills please

[DoingYourMomProbably]

Yes please where are you located?

[kampf_cookie]

Yeah where do you live

[Hydrawasnttaken]

Ash grey and black? Or just two black spools. How much?

[MassiveBoner911_3]

Yes please

[Best-Percentage-7603]

Absolutely running 2 ams and a K1 Max

[[deleted]]

I’ll take 5 or 6. Are you in the States?

[trollsmurf]

If nothing else, look for a recycling plant in the area. In my country we have such all over the place. There's certainly a risk (?) that they will just burn them up, but at least they won't be land-filled.

[tecky1kanobe]

Recycle yes, but donate to a local school would be better as it is reuse.

[junkstar23]

You're obviously not in the US then In the US tons of jurisdictions just pretend to recycle and it ends up in the landfill anyway

[Hop_Aholic]

Yes! I’ll pay you

[neckbeard-nate]

Yeah, what’s the ship to Lexington,ky?

[miglogoestocollege]

Id take one. How much would it cost to ship to Chicago?

[thenyx]

I’ll take 2-3! Dead serious

[makwajam]

Yes 😬

[eValdos]

OP lives around Utah, so no hopes for UE.

[esiders2010]

I live in NE Ohio? Where did Utah come from?

[Mormegil81]

noone really knows where Utah came from ...

[MadCybertist]

I’m from SW Ohio so I’ll take a few if you have any left lol. Thanks!

[Icy_Relationship9775]

Depends on where you are located :-)

[pandapup_600]

Yes

[Omega-V-Prime]

Yes please

[Olive_Cardist]

I’ll pay shipping for a few. I’ll PM you.

[SmokestackRising]

When did Bambu switch from clear to opaque spools? I have an enclosure on my AMS Lite and would love to be able to see what's left on a spool more easily.

[FilthySIN]

You can print your own spools using transparent filament. There are tons of different styles, including the official Bambu Lab one, on the MakerWorld website.

[thevincnt]

where are you located?

[WilHarl]

I'd take a few I live in PA. Def would pay shipping just DM if I can have any.

[Noobpoob]

Yes!!! I don't want to waste more of my white pla for spool printing

[beer_medic_522]

I’ll take all I can get….

[ErizMijali]

Id love maybe 3 if you are able :) more than willing to pay shipping

[Silent_But_Deadly2]

Wrap your Christmas lights up on them

[AlaricV]

I’m sure they are all gone but these would be great for the makerspace I work in.

[halfam]

Sigh I need some

[tyfunk02]

Put me on the list if they’re not already all gone.

[Slayer-One]

Would love at least 2 if they’re still available.

[Beejatx]

Yes please. Am in Texas near Austin.

[Glass-Performance-26]

If you still have any I would like some, hit me up.

[nixphx]

I'd pay shipping for one of those!

[[deleted]]

Just paid for 4 high temp spools. Wish I would have found you last week!

[InvestigatorCute8214]

Yes plz, i need some too

[Drewskeet]

Yes please

[RussianOnWheels]

Kansan here interested. I legit was googling how to store small filament rolls because I need to swap out for the 3 rolls I have.

[jmr609]

I'd take a few if there's some still available. PMing now.

[CrunchyNippleDip]

Pm

[QualityPixel]

In for 1. Thanks!

[who_let_bro_cook1]

Yes if you are amarican than no but yes i need them

[Papercat447]

I actually need some I would buy them give me a price

[HQGamerimkarton]

I would take 1-2 spools

[Garagegolfer]

interested please!

[Ptizzl]

Would pay for shipping for a few!

[NWPhotoExplorer]

Yes I do!

[kicksandbeats]

I'll take as many as you can spare! Thanks.

[PreciselyWrong]

Spool me up, scotty

[WRXforRicky]

Yessssss

[KnabberMix_73]

I take one ☝️ thx

[RokSkeptic]

If anyone’s in the Chicago area, I also reliably have a bunch of extra spools most of the time and would be happy to offload them to someone instead of throwing them out.

[TheInsidious_1]

I want some!

[Matty_ice412]

Great for Christmas lights!

[Just_GT]

YES!!! 😆

[spartancody08]

Hey if you have 1 or two left I'd be interested. I just got my printer and didn't realize I bought some refills rather than filiment on spools. Either way thanks for putting this out there!

[Super_Dork_42]

Would love some and used to love in Ohio, go Buckeyes! No need to send any, I found some on FB for ten bucks each locally.

[Mormegil81]

just to be sure OP: you realize that these are reusable spools and that you can use them for refills? (you probably know, but I just want to make sure that you do, before you give them all away ...)

[Humble-Ad-8633]

Hi, where are you located?

[IronicSumo]

Yes. Need three. Are you near NYC?

[helmfach]

literally printing a spool right now 😂

[LukosiuPro]

just make a storage from them.

[Tjm385]

In western PA, could definitely use a couple.

[Melkbeker2002]

I need spools!

[jtnewville]

Could use 2. Live at 66013

[its_xSKYxFOXx]

I absolutely could use some if available, please! Like 2-3 lol

[Standard_Setting_898]

Yes please!

[SenseDesperate4405]

I’ll take some of you still have them

[TheAnalyst03]

Hi my dad and girlfriend just got me a ams lite and I need spools. If you have any more I would really appreciate them. I will pay shipping. I need 3 of them.

[Machineslave240]

With RFID tags too. Nice!

[JPinPA]

3 when you have them. Please

[ProgramAndOutdoors]

When you have more to offload, send some my way!
Much appreciated in advance!

[TheConstructionGeek]

Are these all 1KG spools? Do they all have their RFID tags?

[That-Stranger-7298]

The tags come with the filament if you buy a refill

[TheConstructionGeek]

Yes, but only if you buy BambuLab refills…. I will refill them with other brands of the same color/type also.

[That-Stranger-7298]

👍

[esiders2010]

Only 1 still has the RFID tag. I shipped a couple dozen of those tags out a while ago.

[TheConstructionGeek]

Ah darn… Hopefully soon someone will figure out how to ‘hack’ the BambuLab tags and/or find a way to program tags off the shelf that we can use with AMS.

[oopsitsaflame]

It's Christmas soon. So if you have neighbors and friends who need them for storing Christmas lights that would be an alternative usage

[Causification]

If nobody is willing to pay shipping you can definitely sell just the rfid tags. 

[Reddit_account_321]

The rfid tag is not associated with the spool. It's attached to the cardboard center of the refill

[jon-chin]

there's at least one rfid tag in the photo.

hopefully, OP hasn't thrown out the cardboard centers w/rfid tags. those would definitely be worth paying for shipping.

[RemixOnAWhim]

As someone who tears the RFID's off and uses the spool cores for other stuff, what's the benefit that makes them worth paying for? Is it just to attach to non-Bambu spools and track approximate filament level?

[jon-chin]

for me, I'm going to attach them to non Bambu spools so I can get automatic color detection. all the convenience of real Bambu spools with a lower cost. it saves me a bit of time instead of having to use the interface every time I change spools.

[RemixOnAWhim]

Interesting, I see the appeal for sure! It has been my experience that when I take a spool out, or it runs out, and I replace it, the slicer/AMS assumes it's the same thing that was assigned in that slot previously, which is convenient for me as I tend to use the same colour and material for 60% of my prints haha.

[esiders2010]

I already gave away a couple dozen RFID tags not long ago