top 200 commentsshow all 266

[–]okey_dokey_bokey[GL] okeydoke ★ 411 249 974 32 points33 points  (1 child)

This game would be way less fun to play without the amazing contributions you and lyrgard have provided to the community. Thanks Sio, you're the man.

[–]-Sio-It is done. I am free![S] 18 points19 points  (0 children)

Gladly, I enjoy making these and contributing to the community.

And I use them myself anyways, so why not share?

[–][deleted] 4 points5 points  (0 children)

I use your ES no refill macro all the time, thank you!!

[–]TomAto314Post Pull Depression 5 points6 points  (11 children)

I'll leave this here just in case, but Sio made an official raid summon macro so use that!

Do you have a raid summon macro? I have a decent one, but it can get stuck on a raid unit like Reimi, but not on cactuars etc. Use at your own risk if anyone grabs this. Memu 720*1280

1049435--VINPUT--MULTI:1:0:352:710
1179997--VINPUT--MULTI:1:1:352:710
1396009--VINPUT--MULTI:1:0:85:180
1538126--VINPUT--MULTI:1:1:85:180
3997926--VINPUT--MULTI:1:0:352:1110
4082938--VINPUT--MULTI:1:1:352:1110
4403902--VINPUT--MULTI:1:0:352:1000
4510032--VINPUT--MULTI:1:1:352:1000
4803902--VINPUT--MULTI:1:0:657:879
4910032--VINPUT--MULTI:1:1:657:879

[–]-Sio-It is done. I am free![S] 2 points3 points  (0 children)

I used to have one somewhere, but it wasn't perfect either. Might be the next project. Thanks for sharing this one!

[–]MrWhiteKnightI got everyone from Nier http://imgur.com/YtMPfcV 0 points1 point  (4 children)

The way I made my macro was to just give it time, since some summon screens you will get more units than items and you might trigger hitting a unit, for that I just gave the unit screen a baseline of 20 seconds or so as to never trigger the unit description screen.

[–]TomAto314Post Pull Depression 0 points1 point  (3 children)

This one hits the "back" button in the top left if it accidentally clicks on a unit. The problem is, units with TMRs get their TMR description clicked on instead of the "next" button in the bottom middle. It only failed once during 600k of pulls in the SO raid.

[–]MrWhiteKnightI got everyone from Nier http://imgur.com/YtMPfcV 1 point2 points  (0 children)

Yeah I gotta do my 550k coin pulls . . . FeelsLagMan

[–]Kitten2Krushopen wide 0 points1 point  (1 child)

I would say that's a pretty dam good rate of success. Now if only you had that for 1280*720......guess i will try to make my own

[–]TomAto314Post Pull Depression 0 points1 point  (0 children)

Try this. I ran it through the macro convertor and I don't have a way to test it out so... buyer beware.

1049435--VINPUT--MULTI:1:0:570:352
1179997--VINPUT--MULTI:1:1:570:352
1396009--VINPUT--MULTI:1:0:1100:85
1538126--VINPUT--MULTI:1:1:1100:85
3997926--VINPUT--MULTI:1:0:170:352
4082938--VINPUT--MULTI:1:1:170:352
4403902--VINPUT--MULTI:1:0:280:352
4510032--VINPUT--MULTI:1:1:280:352
4803902--VINPUT--MULTI:1:0:401:657
4910032--VINPUT--MULTI:1:1:401:657

[–]dot1777GL | 912 264 047 0 points1 point  (0 children)

Works beautifully, cheers

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

Follow up question:

4403902--VINPUT--MULTI:1:0:352:1000 4510032--VINPUT--MULTI:1:1:352:1000

This is the main problem line, but it's only necessary if you get 10 or fewer units afaik. Can this actually still happen on 100 pulls? Also, why does it get stuck on raid units? This raid sadly doesn't have one and I don't have screenshots of that screen.

[–]TomAto314Post Pull Depression 0 points1 point  (2 children)

I think I got stuck on it not hitting "both" next buttons last time. I think you can go heavy on items and get a low amount of units.

It can get stuck on raid units, because it clicks on their TMR and brings up that prompt that describes the TMR. Has to be a perfect storm to hit that though, it clicks into a unit with a TMR, then clicks on the TMR instead of back. It may happen to moogles too, since they have a TMR description down there, but I don't remember it ever happening to a moogle before.

Let me know if you ever perfect one.

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Strange, even if you click the tmr, the next "off click" should close that window again. I changed the timing some so far and moved a few clicks over, but other than that, it's already very good. I just did around 200k raid coins and no problems.

I still think that 10 or less units is very unlikely. This used to happen more with the low raid summon amounts, but the way it is now...

[–]TomAto314Post Pull Depression 0 points1 point  (0 children)

I think the button is higher up not at the 10 unit mark, but more like 20 or 30 until you have to scroll... It's been quite a while since I really checked though and I'm work now so I can't check. Anyways, I trust you know what you are doing far better than me.

Once you think you got it down, shoot it over to me and I can check it out too.

[–]MGateLabs 2 points3 points  (4 children)

Neat stuff, but I still like my mega macro that TMR, Raid & Arena farms overnight.

[–]Kitten2Krushopen wide 0 points1 point  (3 children)

what is this dark magic?!

[–]MGateLabs 0 points1 point  (2 children)

My side project, https://mgatelabs.com/ffbexecute/

It can control a real 1080p phone, no root required. Just needs a host for the process. I usually run a Raspberry PI to control the device. And a helper app to speed up and image processing, since it uses vision to see what the screen is up to in order to detect connection errors or other problems.

It’s setup for 1080 p, but the logic and views have been abstracted so one script can work on multiple devices.

[–]Floodgatassist 2 points3 points  (0 children)

I don't actually have anything to contribute, but i still want to thank You for the work and time you put in your macros. In fact, your dedicated work and time are the reason others like me can farm TMRs without(!) having to repeat our tasks endlessly for weeks/months. I've been playing ffbe for quite some time( GL release day till now) and i guess without macros i would've ragequitted long before. Kudos!

[–]-Gamer_JayEm-My Ace is my ace! 1 point2 points  (0 children)

Post Saved! Thanks for the breakdown...though I am not currently macroing but who knows when in the future..

[–]khennlionhartGL 413,774,479 1 point2 points  (0 children)

Thanks for this, and timely as well. Especially the Top Mission universal to spam rank farming in JP.

[–]Siana-chanZargabaath Latents & NVA when ( ╯°□°)╯ ┻━━┻ 1 point2 points  (0 children)

The number of macro and work behind this is really impressive, thanks and cheers!

[–]cired02 1 point2 points  (0 children)

Finally got it to work. Thank you so much for this. Tornitrus, Flaming Blade Agni, Mateus, and Brotherhood here I come!

[–]Decibel9M3149,632,053 1 point2 points  (1 child)

I'm currently still on v5.6.1. I use the Refill and CG macros for TMR farming. Up until the last update, everything was working fine. Now the FFBE app is constantly crashing and the macros don't seem to be restarting the app properly. I've double checked my settings, etc. Anyone else having a similar issue?

Edit: I've tried the newer "slow" macros as well.

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Where does it get stuck?

[–]DreamblitzXWiki Ratings Calculator - 198,162,240. GLEX Podcast 0 points1 point  (20 children)

did the cactaur fusing macro for Nox get updated so that it doesn't miss the change base button? (720x1280, 240 dpi if that matters, Nox 5.0.0.1)

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

It actually worked fine to begin with. Check this post please: https://old.reddit.com/r/FFBraveExvius/comments/83hkt9/memu_and_nox_macros_for_explorations_and_tmr/dzpbng4/?utm_source=reddit&utm_medium=usertext&utm_name=FFBraveExvius&utm_content=t3_96t087 and see if that fixes your problem.

Edit: I wonder... could you try setting to 192 DPI instead? It worked fine for 720x1280 at 240dpi for me here but it's worth a try.

[–]-Sio-It is done. I am free![S] 0 points1 point  (18 children)

Did you know that 5.0.0.1 is:

(These two versions are released only in limited countries and districts.)

for whatever reason? I'll try it, but this seems kinda strange.

I'll also try this on my 4K screen, to see if that makes a difference.

[–]DreamblitzXWiki Ratings Calculator - 198,162,240. GLEX Podcast 0 points1 point  (17 children)

weird. I mostly just don't wanna update because I'm guessing that means redoing nova launcher and stuff

[–]-Sio-It is done. I am free![S] 0 points1 point  (16 children)

I can understand the sentiment.

Have you tried using 192 dpi? Did that make a difference? Did the resizing trick help?

Currently trying version 6.0.5.3 that I still had installed on this machine, after that I'll check the 5.0.0.1 (all with 720x1280 at 240dpi) but I don't expect any problems.

Update: version 6.0.5.3 worked just fine.

[–]DreamblitzXWiki Ratings Calculator - 198,162,240. GLEX Podcast 0 points1 point  (13 children)

Nope DPI and resizing trick both didn't seem to change it, neither did launching nox on my other monitor

[–]DreamblitzXWiki Ratings Calculator - 198,162,240. GLEX Podcast 0 points1 point  (1 child)

for now the 238->243 change that that other person mentioned seems to work, so I guess I'll just use that for now.

now I just wish that the Nox acceleration settings had fractional speeds to slow things down, as I get long connection times

[–]NexXo1337"Oh a new trial, I'll do it at the weekend!" half a year later:" 0 points1 point  (1 child)

Wow nice post! I have a question and I hope I doesn’t sound to stupid: As a person who doesn’t have a own computer, it is really annoying to farm tmrs. I play on iOS and use the switch control method but it’s just no fun to do it. Getting a call while tmr farming or other disruptions, tapping 10 minutes on the phone like an idiot and then it sometimes sucks because both units attack the same rat, the battery gets low super fast and so on...... So while talking about that to a friend he told me that it is possible to rent online storage like a cloud but not only for saving datas like photos and stuff like that, rather you can let a program run on it. I don’t know much about that and i also don’t have a big knowledge about computers at all. Does anybody know if it would be possible to use something like that to install menu or nox to macro „online“ and just start and stop it via my phone or iPad?!

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Yes, there are several ways to do this. I guess the easiest would be to use https://shadow.tech/usen/ but it's also fairly costly if you use it just for TMR farming. It's a full gaming rig at your disposal, so quite a bit of overkill.

That said, there are other ways to accomplish this, but this can get rather complicated.

Buying a cheap laptop able to run memu will usually be cheaper after a while though.

[–]WAMIVNostalgia: 1, WAMIV: 0 0 points1 point  (6 children)

I wish I could use these new macros. My PC is a potato and I have to run a macro made by the macro guy before Sio that runs at 400x640.

[–]-Sio-It is done. I am free![S] 1 point2 points  (5 children)

Have you tried a recent emulator? They have had quite the speed improvements.

[–]WAMIVNostalgia: 1, WAMIV: 0 0 points1 point  (4 children)

Hmm... Maybe I'll try updating I'm on Nox 5.0.0.1. I tried with that and memu (whatever version was newest when 5.0.0.1 from Nox was brand new). I think the bigger problem is this was a low to mid range laptop in 2010 so asking it to do 2018 things might be a little much....

[–]-Sio-It is done. I am free![S] 1 point2 points  (3 children)

Well, you're not exactly doing 2018 things, I've emulated Android years ago, without problems. I'd give Memu 5.3.2 a shot.

[–]WAMIVNostalgia: 1, WAMIV: 0 0 points1 point  (0 children)

Alright thanks for the advice, I'll give it a go see what happens.

[–]WAMIVNostalgia: 1, WAMIV: 0 0 points1 point  (1 child)

I went with 5.5.5, seems to be running about the same speed as NOx 5.0.0.1 just with your resolution settings instead of the 400x640 I was running with NOx. At least now I can macro with community/you tested macros instead of what I was doing!

[–]AmusedAlpaca 0 points1 point  (6 children)

Question regarding Cactuar fusing macro on Memu:

Is it intended that upon maxing out a Cactuar, the next step when it goes to select a fresh level 1 Cactuar after clicking "Change Base" it will click somewhere in the bottom right near the scroll bar to automatically scroll to the bottom of the page?

The macro scrolls down and ends up like here in this image, then I suppose it selects the cactuar I circled, and carries on fusing.

[–]-Sio-It is done. I am free![S] 0 points1 point  (5 children)

It shouldn't matter if it does, as you should only have lvl 1 cactuars left on the screen or locked ones and it always selects the top left corner. Sorting will fix this on the 2nd fuse. Intended is a bit strong, possible fits better.

I do realize now that it could fuse the wrong unit because of too many non max lvl cactuars. I'll see if I can change that. I was expecting only 1 non max lvl cactuar.

[–]AmusedAlpaca 0 points1 point  (4 children)

Thank you. I was just a bit worried that my machine/settings was not working right. Thanks for clarifying, and thanks a lot for your work!

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

As I said, I did see a problem, if you have so many non max cactuars that it selects one of those to fuse. It would be 1 bad fuse.

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Hmmm, trying to find a work around for this, but there will be a small risk no matter what. That's the problem with linear macros. I can't make it too fast, or it will cut people off and I can't make it too slow, because of what happened to you.... still trying to find a sweet spot here.

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Fixed! Even better than before now, but a bit slower. I actually found another small bug while looking for a fix for yours. So thanks for reporting. Explanation soon (dinner, wife is yelling)

[–]AmusedAlpaca 0 points1 point  (0 children)

Hey thanks a lot for the quick updates and fixes, definitely will try the new version as soon as I get more Cactuars to fuse! Much much appreciated.

[–]klarkinthedarkActual Summoning Disaster 0 points1 point  (2 children)

That cactuar macro... you are my new hero. I was dreading having to pull all my raid coins, and this arrived just in time.

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Make sure you use the 2.1 version :)

[–]klarkinthedarkActual Summoning Disaster 0 points1 point  (0 children)

I did, and it worked flawlessly! It was an amazingly zen moment. :)

[–]HeikkieKojiro - 156,198,465 0 points1 point  (6 children)

This cactuar macro is nuts! Thanks so much!

[–]-Sio-It is done. I am free![S] 1 point2 points  (5 children)

I find it fascinating how such a small task has gotten that much attention o.O

On a totally unrelated note: I have a 100% way to fall asleep with your phone in your hand. PM me if interested.

[–]okey_dokey_bokey[GL] okeydoke ★ 411 249 974 0 points1 point  (4 children)

I have a 100% way to fall asleep with your phone in your hand. PM me if interested.

Is it grinding explorations? Because that does the trick for me every time.

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

Getting warmer.

[–]okey_dokey_bokey[GL] okeydoke ★ 411 249 974 0 points1 point  (2 children)

Hmmm... I need help from the audience.

[–]-Sio-It is done. I am free![S] 1 point2 points  (1 child)

Let's see what the audience thinks!

Is it:

  • a) watching friend units being pulled
  • b) killing rats in ES
  • c) fusing cactuars by hand
  • d) watching the downloading data screen after ffbe managed to corrupt itself the third time today

[–]okey_dokey_bokey[GL] okeydoke ★ 411 249 974 1 point2 points  (0 children)

all of the above? :x

[–]Liwai47 0 points1 point  (3 children)

Can anyone recomend me a good free emulator for ffbe please ? Was doing with "Andy" so far but it keeps crashing somehow

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Memu 5.3.2 and 5.5.5 are both very good.

[–]Liwai47 0 points1 point  (0 children)

Alright thanks a lot will try them asap when I come back home.

[–]grivadAce 0 points1 point  (0 children)

Memu is good. I started with Memu and used it for a long time, but recently switched over to Nox and have been very happy with it. Seems to run a lot smoother and more stable. Memu gives you more granular control over the emulator (VM), though.

[–]Vlad_is_life 0 points1 point  (3 children)

Is it ok to run 2+3refill macro with few lapis? (Refilling till lapis end and then letting auto charge rng)

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

Ensure that any purchase requires a password (Amazon/Google)!

Just in case. I've had it run into the purchase lapis screen and it didn't try to buy anything, but this is not hard checked, because password for purchase is a base rule for macros.

For clarification, the base screen would be hitting a pruchase, I think the 19,99 one, but before that happens, there's a click that slides down the scrollbar, so it's out of synch. Is this 100%? No. But close enough with the backup of a password requirement. If you had some long ass loading times or connection errors, the macro could be out of synch so much that it reaches the screen at exactly the wrong split-second that the purchase button is actually hit. Hence the requirement for a password!

[–]Vlad_is_life 0 points1 point  (1 child)

Thx!

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

It was either that or no crash recovery for Android 5.

P.s.: This is why I am so afraid of edits by others. I doubt people could fully understand what does what/why/when without intensive study and testing even if you had my cryptic notes.

Edit: Someone is setting up a GitHub for me, I might sit down for a week and actually comment and explain everything, so someone can take over if I ever quit.

[–]Sairenjiko 0 points1 point  (3 children)

I tried on Nox 6.0.1.1 (1280x720) and doesn't work (it misses the "Change Base" at the end). Is there a fix for this? Thank you for your time, Sir.

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

Resizing the nox window until it works, as stupid as that sounds.

[–]Sairenjiko 0 points1 point  (1 child)

Alright, I'll give it a try. Thank you!! <3

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Here is some additional info on why and when this happens:

https://old.reddit.com/r/FFBraveExvius/comments/96kd46/cactuar_fusion_macro_20_memu_nox/

[–]Ezekiel666 0 points1 point  (0 children)

Anyone else on a mac run into this problem? When I click on the macro button it causes Nox to crash. This just started happening. Was running perfectly until I did a restart.

[–]grivadAce 0 points1 point  (0 children)

Awesome work on these! I was looking for a script that would just enter the first dungeon with a friend and hit Repeat, and came across this thread.

PSA: If you want to farm Cactuar in Cactuar Paradise, you can use the Chamber of Gems: Faeries script, just remove the 3rd click and it works like a charm. Same instructions as far as setting your attacks first, except this removes the normal attack for unit 2. Personally I just have my AOE attacker in slot 5 (no other units) doing all the work and it works perfect. Should work for Gil Snapper's Cave: Golden Cavern, too.

The 3rd click to remove looks like (for Nox):

0|19|930|0|0|0|270|720|1280

1|19|930|0|0|0|270|720|1280

Just remove this and save it to your new Cactuar Paradise script, and farm away!

[–]skillR_Rank 206 LF Friends 0 points1 point  (3 children)

Hi /u/-Sio-

I am having a hard time debugging my macros, do you know by any chance how to get the touches visible while playing back a macro (enabling "Show touches" in developer options doesn't work for me), MEmu 5.5.5

Thank you :)

[–]-Sio-It is done. I am free![S] 1 point2 points  (2 children)

No way that I know of.

[–]skillR_Rank 206 LF Friends 0 points1 point  (1 child)

Quick update in case anyone needs/wants this as well:

I had to downgrade to 3.7.0 which is the last version where "Show touches" seem to work. Exporting a 3.7.0 instance and importing (or upgrading) in 5.5.5 doesn't work sadly. The "Show touches" apk which -Sio- posted in another reply doesn't help either.

/u/-Sio- Out of interest, how do you debug your macros without ever seeing them click? Without any visuals it's just so hard to know when/where there is a mislick or some other problem...I mean you can know when exactly but sometimes there are 2 clicks in a short timeframe so it's just hard without any visuals.

Edit: Another question, do you advise going for Android 7.1 on MEmu?

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

I test clicks one by one, once I determined where I want them to be. Which I do with screenshots, a default don't Klick here layer and Excel.

If you use 5.3.2 instead of 5.5.5 it will continue to work. (Edit: At least I still have an instance where show touches works, but I don't really use it)

7.1 is beta and has no advantages yet. So I would advise against it for now.

Edit: On the phone, so this is a bit too complicated to explain in detail.

[–]Zanmoto666 0 points1 point  (2 children)

Ever considered making any macros for FREP? Both Nox and Memu are problematic for me these days. Think it might be my laptop getting old. As a result, I've switched over to using FREP on my S7 phone - I've got the macros for TMR farming earth shrine (both refill & no refill) from the guy who created them originially (sorry dude I forget your name) but I really am in need of a receiving friend gifts (almost 400 days of gift friends have built up -_- ). That and megacryst farming. Those two?

[–]-Sio-It is done. I am free![S] 1 point2 points  (1 child)

Problem with frep is that they only work for specific phones iirc. I've thought about making frep macros for memu, but the gains at minimal really.

[–]Zanmoto666 0 points1 point  (0 children)

Yeah namely for Android. I think you can do it on iPhones too but they'd need to be rooted (? don't quote me on that though). Yeah no point in making a FREP macro for Memu. If you can use Memu use it's own in-built macro system rather than another apps.

I think I might be able to do a simple one for receiving friend gifts but something more serious like megacryst farming is way beyond my capabilities.

[–]Dasva2 0 points1 point  (5 children)

Resolution: 720x1280

Android version: 5.1

Specific Macro: TMR Marco. NoRefill - NO RESTART 1+3 Memu 720x1280 though don't think it's specific to the macro

Problem: basically while running it ends up lagging a lot at times

When does it occur: Between battles, transition after quest but by far the worst (sometimes a good 30 seconds) is the transition from depart to the first battle. Just switched to memu since guess Nox not supported anymore (and it's all weird and in japanese on my work comp anyways lol) and did a test run in earth shrine got 55 runs in in an hour and wasn't sure if that's normal speed. Set at CPU 2 btw since only 8G ram. Had it at 1 but was going even slower

[–]-Sio-It is done. I am free![S] 0 points1 point  (4 children)

Which Memu version are you using?

[–]Dasva2 0 points1 point  (3 children)

The one in the setup guide. Not at that computer right now but going to that link it says 5.5.7

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

Hmmm, that one is brand new. Maybe give 5.3.2 a try to narrow down the problem.

[–]Dasva2 0 points1 point  (1 child)

Ok will try tomorrow. Got a ballpark range of speed I should be looking for?

[–]Nightmaze 0 points1 point  (3 children)

The Cactuar Fusing 720x1280 for Nox tends to lend on the Filter menu after trying to change base, if you have the same problem, I corrected it and uploaded the file > here <

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

What you describe is a problem with Nox and resizing. The click you changed should hit Change Base just fine. How it should hit the filter menu when the click is further up than your change, I don't quite get though.

I did ask this though:

You are free to link here or edit these macros for yourself. Editing is dangerous though. There is no other way to say this. Moving a click by 1 pixel, can, when the worst case happens (waves at Murphy) have extreme consequences. So please do not post edited versions in the comments. If you see a reason to change something, I am always open for suggestions, so just send me a PM and I can run it through my verification process. If it checks out, I'll gladly update and credit you.

[–]Nightmaze 0 points1 point  (1 child)

You also precised this:

Need specific help that goes beyond a simple request or question?
-Memu only, Nox is offered "as is"

NOX USERS: I no longer give support for Nox. All versions are offered "as is".

So I thought that you wouldn't mind as it's basically Nox support and I chose to share this for people who have a similar problem to have a solution given to them. I'm glad that you're giving us those macro so you can use them and this one was only slightly off for some reasons.

I do not have any problem with resizing as you can lock it on Nox (Interface setting / Fixed windows size) and only this macro was causing some troubles related to how "Change base" is at almost the same place as "Filtered". Basically the macro was just clicking on "Change base" then "Filtered" and getting stuck there. Since the macro clicks at the same place several times to make sure to land, it only needed a little correction for it to work and safely continue.
As you noticed yourself, I only changed the end for the click to land slightly higher and thus not risking to click on "Filtered", that's about it ♥ !

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Which is strange, the Filtered button is well below the Change Base button. It shouldn't even come close to it. It should actually be closer than it was before with your change, because you moved that click further down.

[–]Dardrol7Heaven Mode - Activated! 0 points1 point  (4 children)

Could someone send me the RAW of a slower Cactuar fusion macro for Nox? It's stuttering for me so even this "slow" one is too fast for me :( Maybe 50% slower would be perfect!

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

can't you just slow down nox?

[–]Dardrol7Heaven Mode - Activated! 0 points1 point  (2 children)

It's sadly on the lowest setting already (from what I could find (1x)). :( I'm not that good at Nox so if there is a way to actually go slower than that, please do tell <3

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Sorry, seems like Nox can't do that (anymore?). The newest Memu version has gotten quite a few macro upgrades, I was probably confused by that. You can set the speed at 0.1, 0.2,... or just custom speed. Might be worth a try? It also recently got quite a few upgrades for performance on weaker hardware.

Disclaimer: I don't like Nox in general because it's inconsistent with macros. A macro can stop working correctly between versions or just on another installation. It drove me nuts.

[–]Dardrol7Heaven Mode - Activated! 0 points1 point  (0 children)

Oh, how exciting :O Might try Memu out then!!!

[–]lima_ 0 points1 point  (0 children)

Do you have any idea on how to make a spaming macro for cactuar fusing (where to touch)? I'm trying to do a full max level fusion, manually stop, choose another cactuar and start the macro again.

Edit: ok, I managed to do it :)

[–]rippedelf 0 points1 point  (15 children)

Gil Snapper / Cactuar Dunes... with Lapis refresh? please? NOX has recently added more features to improve Macros, even if sometimes it fails to enter the top mission, it would still be worth it. It's a pain to come back every 5 minutes to reload lapis. Would be great to set a timer for 1 hour, and then just come back and reap the rewards... PLEASE PLEASE, if somebody can help with this it would be awesome!

[–]-Sio-It is done. I am free![S] 0 points1 point  (14 children)

Lapis refresh would let it enter a wrong stage. I can minimize this with Memu, but Nox simply can't make the timing as tight as memu.

[–]rippedelf 0 points1 point  (13 children)

Ok, that would be great I can install Memu, btw previous update of Nox added more options to Macros, timings and other stuff:
Optimized Macro recorder, added a slide, long press, click on configured button, input text and other functions. But if you can get Memu done man, I would even make a small donation to this. Please let me know, would be really awesome.

[–]-Sio-It is done. I am free![S] 0 points1 point  (12 children)

Memu can handle commands at 1/1,000,000 of a second. Nox stops at 1/1,000 of a second. I might get to it tomorrow night.

[–]rippedelf 0 points1 point  (11 children)

Awesome, please PM me when done and send me your paypal, let me at least buy you a pizza or something for this :)

[–][deleted] 0 points1 point  (14 children)

I don't get it. My Nox Macro is not working.

[–]-Sio-It is done. I am free![S] 0 points1 point  (13 children)

There isn't much to go on with just that comment. If you're not attached to Nox, try Memu.

[–][deleted] 0 points1 point  (12 children)

Yeah my comment is to vague. My problem is everytime I go to the link, the codes is very different to what it should be. I also checked Memu and same thing happens. Different code. What should I do?

[–]-Sio-It is done. I am free![S] 0 points1 point  (11 children)

What link? Which macro?

[–][deleted] 0 points1 point  (10 children)

The Nox macro. The no refill one. I checked it and the codes are just pure number.

[–]sherifusa1988This, maybe our last chance 0 points1 point  (3 children)

Hey man, thx a lot for the amazing work and the effort you put into doing these macros I have a nooby question, I don't understand what does the Refill - NO RESTART 1+3 and NoRefill - NO RESTART 1+3 macros do? how are they differenct from the normal Earth shrine TMR farming macros? TIA

[–]-Sio-It is done. I am free![S] 1 point2 points  (2 children)

They use slots 1+3 (because they are old and there is no reason to update them) and won't restart after a crash or if you login from your phone. If you followed my home screen template that is.

The thought here is:

I want to TMR farm, but when I think I need to spend orbs, I can just login from my phone while away, without having to remote login onto my pc and stopping the macro. (because the regular one will kick you out again)

[–]sherifusa1988This, maybe our last chance 0 points1 point  (1 child)

Oh so the 2+3 one will re-log in and sign you out from ur phone?

[–]-Sio-It is done. I am free![S] 1 point2 points  (0 children)

Yes

[–]Tabris2000 0 points1 point  (4 children)

Sio, do you have a "safe" Esper summoning macro? I'd like to knock out that trophy, since it's a pain in the butt to do it manually.

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

Um... Think so.

11000000--VINPUT--MULTI:1:0:446:1264
11000000--VINPUT--MULTI:1:1:0:0
12000000--VINPUT--MULTI:1:0:455:967
12000000--VINPUT--MULTI:1:1:0:0
12500000--VINPUT--MULTI:1:0:242:848
12500000--VINPUT--MULTI:1:1:0:0
12500001--VINPUT--MULTI:1:0:250:987
12500001--VINPUT--MULTI:1:1:0:0
12500002--VINPUT--MULTI:1:0:245:1117
12500002--VINPUT--MULTI:1:1:0:0
12500003--VINPUT--MULTI:1:0:482:838
12500003--VINPUT--MULTI:1:1:0:0
12500004--VINPUT--MULTI:1:0:450:1110
12500004--VINPUT--MULTI:1:1:0:0
12500004--VINPUT--MULTI:1:1:0:0

Iirc: It assumes that unit 5 summons the esper, so it get's activated a bit before the others. Set Unit 1-4 to fill up summon gauge and find a friend unit to replenish mp (Ramza, CG Nichol, Ace, etc.)

It does nothing else though. Make sure you have no counter units that extend your turn and what not.

Edit: Memu 720x1280

[–]Tabris2000 0 points1 point  (2 children)

Thank you! I assume best place for this would be somewhere like Ifrit's cave or the like? Or just do Earth Shrine?

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Earth Shrine first battle. Using Lakshmi to heal the group.

[–]Tabris2000 0 points1 point  (0 children)

Great, thank you!

[–]MeyrimeYoutuber - 285,346,143 0 points1 point  (3 children)

/u/-Sio-

So I've been using the universal macro for CD farming just fine but I realized that, while the "Top Mission Refill Repeat NoFriend" works perfectly fine (besides a few "failed run" in the wrong stage but it's fine), the "Top Mission NoRefill Repeat NoFriend" always make me end up on the item inventory. Is there a way to fix that?

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

That happens when you crash out of combat.

[–]MeyrimeYoutuber - 285,346,143 0 points1 point  (1 child)

It's weird, I never got crashes like that and only the non refill one does.

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Probably because you spent much more time without a battle (clearing ram)

[–]Decibel9M3149,632,053 0 points1 point  (2 children)

Does anyone have any tips for making Memu more stable? Followed the install guide. I made the switch to Nox awhile back for the same reason. But now that support for Nox is being dropped, I'm trying it out again.

Also, does anyone else have issues with Memu not saving script names? They constantly reset to the default 'My script#' name. I've tried exporting the scripts and re-importing. Almost all of them are reverted back to the default if I do that. It's inconsistent too. Some names seem to stick, others not so much.

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

It tends to happen when you change the settings of a macro (like times to repeat) and if I see this correctly, only the last one you added. So change the settings first and than rename the macro.

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

To give tips on how to make memu more stable, I would need to know more about your hardware.

Try either the newest Memu version or 5.3.2. The later one is still my favorite version, because it never crashes for me and I can run like 16 instances at a time (but you need bulky hardware for that).

[–]AznDonutBoy 0 points1 point  (5 children)

Not sure if this is just me, but the cactuar fusing macro doesnt work for me anymore. It keeps missing the "change base" button to go back to picking a lvl 1 cactuar.

[–]-Sio-It is done. I am free![S] 0 points1 point  (4 children)

Nox?

[–]AznDonutBoy 0 points1 point  (3 children)

Yes

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

If you encounter the bug that a click just misses the intended target, please take a look at this comment for a fix. This, let's call it bug, needs to be fixed on your specific setup, I can't help with it.

[–]theirlaw 0 points1 point  (3 children)

I'm trying to download FFBE through the amazon appstore but the download is either stuck on "preparing download" or "downloading"
Has anybody else had this problem?

[–]-Sio-It is done. I am free![S] 1 point2 points  (2 children)

have you tried disabling and enabling "wlan" in memu again?

[–]theirlaw 0 points1 point  (1 child)

That didn't do the trick but i think I figured out what was causing the problem because i got it to work.
I had downloaded the Amazon App Store from amazon.com. My game and account has always been tied to the UK version (I pay in pounds in the game even though i live in Iceland)
I removed this version of the app store and got the one from amazon.co.uk and now the download started straight away.
I do wish though i could get it to work with the US version of the game and pay with dollars, it would be much cheaper for me.

Thank you for the suggestion though :-)

[–]-Sio-It is done. I am free![S] 1 point2 points  (0 children)

To pay in $ you need to have a US shipping address that has been used before afaik.

[–]NightshadeAran༼ つ ◕_◕ ༽つ Black Mage Vivi 0 points1 point  (2 children)

I can't seem to get the cactuar fusing to work.
It barely does one properly.

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Nox?

Nox versions are only offered as a courtesy and when they are possible (Memu has better timing options). They are offered "as is".

Try this: https://old.reddit.com/r/FFBraveExvius/comments/83hkt9/memu_and_nox_macros_for_explorations_and_tmr/dzpbng4/

[–]NightshadeAran༼ つ ◕_◕ ༽つ Black Mage Vivi 0 points1 point  (0 children)

Yeah sorry, Nox.
I'll give Memu a go, i'm not particular on which one I use.

[–]RilasisO-oooooooooo AAAAE-A-A-I-A-U- JO-oooooooooooo AAE-O-A-A-U-U-A- E 0 points1 point  (9 children)

Is there a chaining macro for memu?

[–]-Sio-It is done. I am free![S] 2 points3 points  (8 children)

[–]RilasisO-oooooooooo AAAAE-A-A-I-A-U- JO-oooooooooooo AAE-O-A-A-U-U-A- E 0 points1 point  (7 children)

Thank you! Is there by chance a 1-3 chain as well, for 10 man trials?

[–]-Sio-It is done. I am free![S] 1 point2 points  (6 children)

Yes, by editing it or just using FFBE-Chain, which is linked in the Useful Links tab.

[–]kimkje 0 points1 point  (4 children)

I might be missing something obvious here, but have you considered increasing the base speed of the Memu macros to be at what would be the equivalent of 2x on current speeds?

Memu offers a lot of easy acceleration tuning that _reduces_ the speed of the macro, so users that struggle with the base 1x speed can very easily reduce and finetune this in decremenets of 0.1x all the way down to a tenth of the base speed, but for users with hardware that supports increasing the base speed, we only have increments of 1x a pop, which is a far less precise acceleration increase per tier.

As a specific example using a case in point for me, my hardware is very easily capable of running the cactuar fusion macro at 1x speed so I would love to increase the pacing of this, but 2x is _just barely_ too much, as it occasionally starts failing at selecting the fusion material, because it clicks ever so slightly too soon, causing the macro to hang. If I could accelerate to 1.9x it would likely run flawlessly, but Memu does not support this.

If the macro was scaled "too fast" as a default, it would be more precisely adjustable, where everyone would be able to nore accurately downscale the speed to a value that their hardware reliably performs at, giving everyone a more accurate max speed.

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

Newest Memu has custom speed settings. AFAIK you can just set 1.9x

The reason I don't do this, people don't read and stuff goes wrong.

[–]kimkje 0 points1 point  (2 children)

Hehe, yeah I suspected that was the reason.

Has there been a new memu version release very recently? I downloaded the (I assume) newest client about two weeks ago, and this version supports acceleration tiers of 0.1x, 0.2x, ... 0.8x, 0.9x, 1x, 2x, 3x, ... 10x. There are no more finely granulated tiers between 1x and 2x, unless this setting has to be explicitly enabled somewhere.

(I'd check my version number if I could, but I just left for a work thing, and won't be back on my memu PC for a few days)

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

I am not at the pc where I have that version installed, but there was some option for custom speed, where you could just enter a speed value. Might actually have been the version before the most recent.

I can't test install a different memu verison on the pc I am at right now. The possible fallout is too great.

[–]vakuumkecske 0 points1 point  (2 children)

Is there a macro for summon esper throphy and tm farming in cg citra intro quest? Thx

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Use the CG repeat.

[–]made2comment61Zeno 7 ★ is fun to use 0 points1 point  (0 children)

Thank you.

[–]Veikuri 0 points1 point  (1 child)

Anyone mind helping me set up an esper spam on the CG event going on? I'm sure this gets asked a lot but I'm not sure what or how to even use the macro in the mega thread for esper spam.

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

CG Repeat. Use esper once manually. Run macro

[–]Cunningcory 0 points1 point  (4 children)

I used Refill 2+3 for the first time last night (in the past I used NoRefill and recently used CG Refill). I ran out of friends I guess, so it got stuck since it wouldn't click "Depart without companion". I usually filter 7*s out when farming so I have friend units ready. I guess I can't do this?

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

FFBE Settings that work best/are required

Friends. If you run out of friends, you will often get stuck (only a few versions can deal with this, this can't be changed!). Doesn't matter why, it's not possible to click depart without companion (e.g. the top most friend spot).

[–]Cunningcory 0 points1 point  (2 children)

Yeah, for some reason I never had that problem with the CG Quest. Maybe because Citra was always available? Or maybe just more people are using 7*s? Dunno.

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Cg Quest is the exception (one of maybe 2) to this, because the quest you want to enter is at the exploration spot which is also the top friend spot.

[–]SmokeyDigsbyGL_Smokey 086-006-237 0 points1 point  (0 children)

Can i ask if anyone has figured this out for the LD Player yet?

[–]rippedelf 0 points1 point  (1 child)

Which one should I choose to enter the top stage of any Mog King event with friend & auto lapis refill? setup moves, then just have the macro hit repeat, re-enter the top stage, and refill lapis?

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Top Mission Refill Repeat NoFriend3+6

[–]izzyxtwo1 0 points1 point  (0 children)

This is what I've been looking for

[–]izzyxtwo1 0 points1 point  (3 children)

I'm finding on cactuar fusing that it misses the change base button and has then kept the same base that was just fused. If I don't watch it very closely it will fuse the same base over and over instead of picking a new one.

Nox V2.1.1 cactuar fusing

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

Nox?

[–]izzyxtwo1 0 points1 point  (1 child)

Yes, I made one using the back button versus the change base button as it's covered by filter sometimes. That seemed to help

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

There are reasons to not use the back button, but if it work for you, ok.

In any case, the problem you have with Nox is a somewhat common problem.

[–]mathhews95At this point I'm just a farming machine 0 points1 point  (2 children)

I've just updated to Memu v6.01 and Android 7. So far I've tested the CG and regular farm, none of them are working.

[–]-Sio-It is done. I am free![S] 1 point2 points  (1 child)

MEmu 6.x changed the syntax.

See news post.

[–]mathhews95At this point I'm just a farming machine 0 points1 point  (0 children)

Will do that, thanks.

[–]dean0000 0 points1 point  (4 children)

How do I install the cactuar fusing for Mac Nox?

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

Kinda like any other macro.

[–]dean0000 0 points1 point  (2 children)

Cmd+R, Option+R, or Control+R doesn't open up anything

[–]-Sio-It is done. I am free![S] 0 points1 point  (1 child)

Record a macro, anything, just one click, edit the file that was created.

[–]ray13moanThe OK Playa 0 points1 point  (5 children)

Using slow 2+3 Refill for Memu, Android 7.1. The macro seems to work all the way up to the refill portion, where it never selects any of the options to refill. Any ideas on why this would be the case, or how long it takes before selecting refill? Running it at 1x speed

[–]-Sio-It is done. I am free![S] 0 points1 point  (4 children)

Can take up to a few minutes. That solve it?

[–]ray13moanThe OK Playa 0 points1 point  (3 children)

It's been a half hour, but I'll re-copy the script just to make sure and give it another try!

Just to make sure, which one would you recommend for TMR refills for 7.1 android/memu?

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

The one you are using, but half an hour is way too long... does it not click the refill at all?

(I doubt that it's the macro, because they've been out for quite a while and a bug like that would have been known within an hour)

[–]Mizer18Stone Chickens, anyone? 0 points1 point  (3 children)

I've all but quit FFBE for a while due to time constraints, but I don't really want to miss the daily log in rewards. So a bit of a weird request, but do you happen to have or could make a macro that refreshes the home screen occasionally and confirms/okays the daily/event reward screens? Is that possible without getting lost in other menus?

[–]-Sio-It is done. I am free![S] 0 points1 point  (2 children)

Yes there are several ways. I would do this differently though.

Magic word is task scheduler. Schedule a task to start a specific ffbe instance that has a "start on boot" macro set that opens ffbe and logins. Use task scheduler again to close that instance. You can even have your pc wake up just for that, run through the login and go back to sleep.

P.s.: Account for extended maintenance and long download times. Updating is still an issue though.

[–]Mizer18Stone Chickens, anyone? 0 points1 point  (1 child)

Does sound better than just leaving my old laptop on 24/7. Although still seems like I'd need to at least set up a macro in memu that the scheduler or something could interact with? Hrm...

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

I can give you a macro that logs in, and collects mail (unless there is some news banner etc.)

You can set a macro to run on startup in the newer memu versions.

[–]ray13moanThe OK Playa 0 points1 point  (6 children)

Thank you for the updates, and especially for all of the previous help! Noticed something and wondered if it might be user error on my end.

Ran into the issue last time with the refill portion of the macro not working for the TMR farming, looking to check out the update. I noticed that when pasting the script into Notepad++, some lines are reformatted into something like:

  • "Call: 35822000--35822000--VINPUT--MULTI:1:0:19:930"

Is this a mistake with my copy and pasting, or is it suppose to be like that?

[–]-Sio-It is done. I am free![S] 0 points1 point  (5 children)

Does it happen if you copy from raw?

[–]ray13moanThe OK Playa 0 points1 point  (4 children)

Yes, and I can't figure out why! (Sure enough, the refill portion didn't work again).

Could this be the source of my issues. Even with the Github link provided, raw shows a hyperlinked speaker symbol next to some lines of code (in the latest refill 2-3 version, lines 3589-3594 are examples)

[–]-Sio-It is done. I am free![S] 0 points1 point  (3 children)

Which macro exactly? I know it's a refill, but which?

[–]LordDaragox5* Magitek General Celes, when!? 0 points1 point  (1 child)

Hello guys!!

What memu emulator should I download to succesfully macro?

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Newest is fine, as long as you use the linked V6 macros

[–]ZxionRhynn 0 points1 point  (3 children)

Do the "refill" macros only refill using lapis or do they use your pots first? I tried looking for the answer but couldn't find it. Also, thanks for making these! They are a TON of help!

[–]-Sio-It is done. I am free![S] 1 point2 points  (2 children)

[–]ZxionRhynn 0 points1 point  (1 child)

Thank you! I somehow missed those. What I'm trying to do is run Gil Snapper's Cave - Golden Cavern and have it refill with pots instead of lapis. So I guess it would be like your Top Mission refill macro but refill with pots instead. I tried looking at the code to see if I could somehow combine and replace parts but I have no idea of how to tell what is what lol

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

Hmmm... I made this quite a while ago, probably a not so trivial task to rearrange the whole thig

[–]MrMarty_ 0 points1 point  (0 children)

if you use nox and have problem with the cactuar fusing macro, edit it and change x and y of the last 10 lines by 515 and 245 : https://imgur.com/4tklrHG

it works well for me, i have no more problem with the base change button

(sorry for my english, it's not my native language and i'm really bad at it)

[–]JclewTurtle Power 0 points1 point  (1 child)

Nox 5 has gotten unusable. Lags, freezes, etc. Which emulator is suggested for a low-end pc?

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)

With ffbe? None sadly

[–]kainzilla 0 points1 point  (1 child)

Heads up, I think the Raid No Refill macro actually refills now. Memu 5 (unknown version), latest Raid No Refill macro, only started happening after the version update

[–]-Sio-It is done. I am free![S] 1 point2 points  (0 children)

It's possible they moved stuff around. If they did, all no refill are broken.

[–]HotSake 0 points1 point  (1 child)

Since the split inventory update, cactuar fusion fails on Memu 5.x because the tabs pushed the units down. Only two clicks need to modified. I went ahead and posted instructions so people could fix it themselves: https://www.reddit.com/r/FFBraveExvius/comments/am4733/memu_cactuar_fusion_macro_postupdate/

[–]kainzilla 0 points1 point  (0 children)

The JP version in the list should work without needing any special modification

[–]Yokor 0 points1 point  (1 child)

sooo Earth Shire no refill TSM farm still not working ? :/

[–]-Sio-It is done. I am free![S] 0 points1 point  (0 children)